Hi I just got my Insp 6000 with Pentium M and the Intel Pro wireless internal. So far am totally loving it.
I was wondering tho, I've been having issues with browsing websites. It gives me a message telling me that the connection to a certain site cannot be established. And can only get through to websites about 40% of the time. I was wondering if anyone else is having an issue with this as well.
I know it's not my router since I wouldn't get the messages if I connected it with an ethernet cable. So perhaps I thought it was either the firewall app that came with the Insp 6000. But I tried disabling it. Also tried my laptop on the DMZ of my router. And still I would connect to websites about 40% of the time.
Could it be because of the encryption that I put on my wireless router? I put a 64-bit encryption, just so my neighbors won't leech or anything. But that shouldn't be an issue should it?
I was wondering if anyone else was having issues with the wireless card.
To see if encryption is causing the problem, temporarily disable it. Are there specific web sites you cannot get to or is just that 40% of the time you can't get to any website?
I tried disabling the encryption and the problem was still there. I also tried it with the power supply connected and disconnected and had the same effect. I can't connect with any website 60% of the time.
I also tried getting the new drivers for my 2915 wireless from Dell's website, but it didn't selve the solution.
So I really think that it's my router. I tried to leech of another neighbor's router and it was just fine. Kinda strange. I have a D-Link and it's been fine until I moved to this house. Perhaps I need to get a new router.
I've got the latest firmware. So I don't think that it's the firmware that's the issue.
Yes, the wireless connection remains intact. I get excellent signal strength and it doesn't seem to be dropping out.
I think it might be an issue with packet fragmenting since it has a hard time resolving the URLs. I'll try adjusting the MTU size when I get home and let you guys know.
It seems like I haven't gotten the latest firmware. I got it updated and now it's working fine. I've activated the auto-scan setting as well. Now it's working. Feeling a bit sheepish. :) Thanks guys.
volcano11
2 Intern
•
27973 Posts
219
0
Posted March 23rd, 2005 22:00
To see if encryption is causing the problem, temporarily disable it. Are there specific web sites you cannot get to or is just that 40% of the time you can't get to any website?
Steve