Hello,

Our 5 Windows 2003 terminal servers configured in load balancing mode so static ARP entry must be present on a switch connecting those servers.

The commands I've executed are:
arp 172.28.81.59 03-BF-AC-1C-51-3B vlan 503
then
arp 172.28.81.59 03:BF:AC:1C:51:3B vlan 503
and finally
arp 172.28.81.59 03BF.AC1C.513B vlan 503

The same error message: "Wrong Value"
The IP:172.28.81.59 is the virtual one assigned to the cluster
The MAC: 03-BF-AC-1C-51-3B is the one generated during the cluster configuration

Exactly the same story if I'm trying to do it via GUI

Any help will be appreciated.

P.S. May be it is not very good idea to mention Cisco on this forum but it is working on Catalyst 3550 by executing: arp 172.28.81.59 03-BF-AC-1C-51-3B ARPA