Alestan

updated

13 years ago

A

Alestan

7 Posts

0

188802

May 8th, 2014 09:00

Proper Method to Restore Running, Startup and Firmware to PowerConnect 6224 Switch

Hello All,

I have a PowerConnect 6224 switch in production that is configured exactly the way I want it.  I have a new PowerConnect 6224 switch that I want to restore the config to; is that possible?  My goal is to not have to manually enter settings for every single switch.

I attempted a few methods but they do not seem to work.  If someone can tell me the correct procedure or point me in the right direction that would be great!

  • Alestan

    7 Posts

    9318

    0

    Posted May 8th, 2014 14:00

    Perfect thanks!

  • shawn_b1

    15 Posts

    9318

    0

    Posted May 16th, 2014 07:00

    I also use Solarwinds NCM for automated backup of configs

  • shawn_b1

    15 Posts

    9318

    0

    Posted May 16th, 2014 07:00

    easy way I do it

    connect to your working switch via telnet or terminal session

    show running-config and press any key till it all displays

    scroll back to top and copy the entire running config and paste into Word

    edit the document to remove the text "--More-- or (q)uit"

    save the document and when you want to deploy it to another switch edit the Ip address and the Ip default-gateway

    connect to the new switch via terminal\console

    reset to defaults

    copy the new text from the word document an paste in the terminal session to the new switch

    Voila ! ! ! the new switch now has the exact config as the backed-up

    you can edit the word document further for more changes before pasting to new switch (e.g. different vlans, different port descriptions, vlan membership, receivers etc)