UNSOLVED
Help with ZTD and S5248F-ON
Greetings, I have been following the instructions posted here: https://www.dell.com/support/manuals/en-in/dell-emc-smartfabric-os10/smartfabric-os-user-guide-10-5-0/dell-emc-smartfabric-os10-zero-touch-deployment?guid=guid-95ca07a2-2bcb-4ea2-84ef-ef9d11a4fa0e&lang=en-us and when I try configure a S5248F-ON, the switch gets an IP address assigned but it never starts the ZTD part. Running a tcpdump on the server I can see the switch sending data but nothing related to ZTD or option 240. The only thing different from the guide is the DHCP server is running Kea since it's replacing ISC DHCP. Does anyone have any pointers or suggestions?
Thanks,
Freddy Rojas
DELL-Chris H
7 Practitioner
•
9682 Posts
•
48046 Points
0
0
Posted January 29th, 2025 21:27
Rfreddy,
While I am not certain it is a problem, I can't rule out that the Kea software may be causing the issue. Other than that I would start with confirming thet the ZTD options, laid out here, are configured.
Let me know what you see and if this helps.
DELL-Chris H
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!