Solved!
Go to SolutionAdding new scalar i500 within networker
I’m trying to get a new scalar i500 with 3 tape drives added in networker to my new primary Win 2008 DR server running networker 7.6.2 . I’ve given the tape library an IP address and can ping it without any problems. I have the tape drives connected directly to the server via FC connections. What is the best way to add the library within networker?
Hi,
Have a look in the NetWorker Administration Guide. There is a section on 'Configuring Libraries and Devices' which describes in detail what you need to do.
-Bobby
Panwar
79 Posts
560
0
Posted January 4th, 2012 04:00
Hi,
There are two ways you can configure Tape library within Networker.
1) Configure Library from NMC GUI.
2) Configure library from Command line
Please refer the KB articles link given below for Configuring library from Command line or NMC GUI
1)How to Configure a Jukebox via the NMC GUI
http://solutions.emc.com/EMCSolutionView.asp?id=esg96089&usertype=C
2)How to configure a jukebox using jbconfig
http://solutions.emc.com/EMCSolutionView.asp?id=esg117491&usertype=C
Thanks & Regards
Panwar