PrestonLad

updated

18 years ago

0

22893

January 23rd, 2009 02:00

SP2309W Monitor occasionally blinks

I have a new SP2309W Monitor which I use with a Radeon X1600 Pro GC.

Have installed latest monitor drivers and latest ATI drivers, and set resolution to maximum.

 

I occasionally have the screen blink/refresh on me with no pattern that I can find.

I have tried reducing the resolution and changing the refresh rate but cannot stop it from doing this.

 

Any ideas?

  • 2121

    1

    Posted January 26th, 2009 13:00

    This worked for me.

    On the Advanced Setting in the ATI Catalyst Control Centre, Digital Panel (DVI), Attributes -

    Tick - Reduce DVI frequency on high res displays

    Untick - Alternate DVI operational mode

    Apply

    No blinking problem now.

  • 2121

    0

    Posted January 26th, 2009 07:00

    I was having a search during my lunchbreak today and found this to try tonight when I get home, otherwise I will have to use the VGA cable.

    http://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&questionID=18858

     

  • rtg2

    4 Posts

    2121

    0

    Posted January 26th, 2009 07:00

    I appear to have the same/similar problem:

    HP 8510p connected to HP Docking Station

    ATI 2600HD using 8.12 drivers

    SP2309W through DVI (VGA is fine)

    and random times I get the whole screen flicking off for a second.  Sometimes its pretty constant, sometimes very infrequent.  It "seems" to happen more when theres a lot changing on the screen, but thats not at all conclusive.  Very annoying being limited to VGA cable!  I've not tried HDMI yet, not have the cable...

  • rtg2

    4 Posts

    2121

    0

    Posted January 26th, 2009 13:00

    Similar results for me - I only has to untick Alternate DVI Operational Mode - wahoo!  Would have found it earlier, but running Win7 Beta and the drivers I was using didnt have those options...

  • someonesmart

    1 Message

    2121

    0

    Posted January 28th, 2009 11:00

    I am also having this issue with my Nvidia 8800 GT and Dell 27" Flat Panel Monitor. Just starts blinking every now and then.
  • jackdlevy

    1 Message

    2121

    0

    Posted February 4th, 2009 18:00

    I have 2 Samsung 204B monitors. Only one did this. I swapped monitors/cables, etc. and the problem stayed with the monitor. Possibly since I went in to change the display to make the same monitor that was blinking the main monitor again. So it could be the ATI 3450 graphics card/settings. Thanks for the help. I tried it and so far....no blinking.

     

    Jack

  • 2121

    1

    Posted February 3rd, 2010 10:00

    I have the ATI HD2400 video card and have the blinking problem.  Checking the Reduce DVI frequency on high res displays helped, but still have the occasional blink. Dell support was useless. Even after I explained that the monitor was just new out of the box, they would not help because my computer was out of warranty. The supervisor said they could not open the account without charging me 49 dollars for a one time service charge. Totally useless. I will probably change computer vendors on the next upgrade.

    Any other ideas?

  • 2121

    0

    Posted February 5th, 2010 16:00

    The problem has been resolved. Apparently all DVI cables are not equal. When hooking up the new monitor I did not use the supplied DVI cable but used the one that was on the old monitor. Switching to the supplied cable resolved all problems.

  • 2121

    0

    Posted February 6th, 2010 11:00

    I had the same problem and solved it by using the supplied DVI cable. When I first installed the monitor I simply used the old DVI-D single link cable and had the blinking problem. When I switched to the supplied DVI-D single link cable the monitor performance was flawless. It appears all DVI-D single link cables are not equal. 

  • 284

    0

    Posted February 6th, 2010 11:00

    I had the same problem and solved it by using the supplied DVI cable. When I first installed the monitor I simply used the old DVI-D single link cable and had the blinking problem. When I switched to the supplied DVI-D single link cable the monitor performance was flawless. It appears all DVI-D single link cables are not equal.