UNSOLVED

richmondman

updated

22 years ago

Closed

R

richmondman

1 Message

0

9512

November 12th, 2004 15:00

Screen repair advice needed!

I have an Inspiron 5100.  A little plastic piece broke off of the back corner of the screen, near the hinge on the left hand side.  That exposed a metal flange or bracket with 2 screw holes, that match up to the 2 screw holes on the body of the laptop.  Obviously, because there is nothing now attaching the flange that is part of the monitor and the matching holes to the body, the screen is unstable.
 
Does anyone have an idea of how I can get a couple of screws or something that will attach the bracket to the hinge?
 
I hope this makes sense!!  Help!!
  • Totis

    96 Posts

    333

    0

    Posted November 12th, 2004 15:00

    Hello Richmondman,
     
    the best thing that you can do is call tech support for replacement.
     
    regards totis.
     
  • MattFrancis

    248 Posts

    333

    0

    Posted November 12th, 2004 15:00

    My suggestion to you is to call Dell Tech Support and see if you can get anything that will help. I would be careful what stuff you use to fix it because if you use the wrong size or the wrong thing you can make matters worse. (Speaking with experiences :P)

    Matt
  • dima333a

    14 Posts

    333

    0

    Posted November 14th, 2004 17:00

    I have similar problem on my Inspiron 1100 :
     
     
    I have contacted DELL and they told me that I have to ship noutbook back to DELL, and if they decide that it is not my fault, they will fix it under warranty, elswhere... I have to pay. ...and it is going to take about two weeks...
     
    So far I still live with the crack
  • dspman

    306 Posts

    333

    0

    Posted November 15th, 2004 02:00

    You also might try http://www.parts-people.com/index.php?action=category&start=12&id=29&subid= if Dell can't help.

    Message Edited by dspman on 11-14-2004 08:56 PM