UNSOLVED

devilrunner

updated

22 years ago

Closed

0

43789

June 30th, 2004 14:00

D600 doesn't power ON anymore

I was working on my d600 when it sudenly powered itself of. I pressed the power button again and it started booting again. I moved it back to my desk and it powered off again. Now it doesn't power on at all.

The only thing isee pressing the power button is a red battery led. Putting it on Ac doesn't change anything.Removing the battery neither.

Sometimes when I aply some pressure to the battery socket or the laptop in general, don't know what the trick is exactly, I get a green light which means it's booting I guess but this only lasts for a couple of seconds.

Anybody have any sugestions or is this a know problem with the D-series?

 

 

  • windchaserb

    22 Posts

    590

    0

    Posted June 30th, 2004 22:00

    The exact same thing happened to me today. I was typing away and my D600 suddenly lost power and died. After a bit it was able to reboot but it happened again tonite when I was doing nothing with it. Bought it almost a year ago too. Darn!
  • 590

    0

    Posted June 30th, 2004 22:00

    And do you to get the same symptons?

    red battery status light?

    Maybe you can get it powered by applying some presure on certain places of the chasis?

    I think I will call dell and ask them what todo....

    Message Edited by devilrunner on 06-30-2004 06:51 PM

  • windchaserb

    22 Posts

    590

    0

    Posted July 1st, 2004 00:00

    Just got off the phone with Dell Tech Support. The prognosis - I need a new motherboard. Of course my warranty runs out tomorrow but they can't find a record of it. Gotta love this!
  • 590

    0

    Posted July 1st, 2004 10:00

    that's a pain.....

    And tell me, do you only get a red battery led indicator to?

  • 590

    0

    Posted July 1st, 2004 19:00

    huh :|, same thing here... I tried to power on the laptop and nothing happened :/
    My battery light ain't red.

  • windchaserb

    22 Posts

    647

    0

    Posted July 2nd, 2004 00:00

    When I plug in my ac adapter into the d600 the led on it (the ac adapter) immediately goes out.

  • Mavs

    9 Posts

    647

    0

    Posted July 9th, 2004 16:00

    I have the power problem this morning. I push the power button, all the lights are green for 3 seconds, then the laptop is off. I am waiting our IT support  to fix it now. They are slow.

  • windchaserb

    22 Posts

    647

    0

    Posted July 9th, 2004 22:00

    Well I got my D600 back from Dell - all fixed up with a brand new motherboard. Works just fine. Glad it came with a 3 yr warranty.
  • OptiPlexed

    1 Rookie

    •

    62 Posts

    647

    0

    Posted July 12th, 2004 17:00

    We had a similar problem with the C Series and after a lot of head scratching we found a surprising fix. Previously, we found having the MB replaced fixed the problem but we felt it was strange for our ironman Dells were having MB failures. (Deleted Long Detailed Story)

    Check the screws on the bottom on the laptop and make sure they are tight. In most of our cases we believe loose screws were the problem and not the motherboard. Of course when the motherboard was replaced, any loose screws were tighten.

  • windchaserb

    22 Posts

    457

    0

    Posted July 12th, 2004 20:00

    Thanks - that was one of the options suggested via a dell support email I received. The screws however, were tight. The motherboard replacement fixed it.