UNSOLVED

FranzGeorg

updated

22 years ago

Closed

F

FranzGeorg

1 Message

0

5502

June 2nd, 2002 09:00

Cannot dock 8200

I can't dock my Inspiron 8200 to a port replicator.

My notebook's lock is covered by a small plastic panel. Should I remove it?



  • Cynthia

    1 Rookie

    •

    97 Posts

    225

    0

    Posted June 5th, 2002 18:00

    It sounds like the dock you are trying to connect it to is a Latitude C/Dock or C/Port. The Inspiron systems are not validated for use with this dock.

  • smarTampa

    1 Message

    225

    0

    Posted June 8th, 2002 12:00

    You should visit a topic under Inspiron. It talks about a way to use the Inspiron 8200 and a Latitude... Some dismantling and BIOS updates must be performed tho... I did it and it works...

    steve

  • McCruzer

    6 Posts

    225

    0

    Posted August 17th, 2004 03:00

    Yes, but I still would like instructions on how to remove the plate. 

    Thanks.

     

  • jingyenshiau

    239 Posts

    225

    0

    Posted August 17th, 2004 16:00

    (1) Disconnect your laptop's power (as usual). Personally, I'd remove the battery, too.
    (2) Remove the plastic cover strip (the one with a vent on the right and a hole for the power button on the left) above the keyboard. You can insert a flat screw driver in the gaps along the sides and pop up the cover strip.
    (3) In the exposed area you'll see two screws holding a metal plate (it's not plastic...). Remove those two screws and the metal plate. Put the plastic cover strip back. Your work is done.

    At least that's how I did it -- well, as far as I can remember.

  • McCruzer

    6 Posts

    225

    0

    Posted August 18th, 2004 05:00

    Thank you so much.  That worked like a charm. 

    The plate is now gone, the bios now changed and the docking port working like a charm.

    Great!