UNSOLVED

tosh81

updated

23 years ago

T

tosh81

12 Posts

0

23274

February 7th, 2004 15:00

Problem with "dxdiag"

hey, i have a dimension 8300 with 512mb ram, 2,6ghz. videocard is an ati radeon 9800. the problem i have is, that several games just wont run on my system. i tried the dxdiag program to find out what it might me. in the direct 3d test i had an error message, because i can´t see the cube you´re supposed to see during that test. it says:

Direct3D 9 test results: Failure at step 32 (User verification of Direct3D rendering): HRESULT = 0x00000000 (error code)

what is the probem? i uninstalled the videodriver and replaced it with the newest one from dell. then i reinstalled directx 9.0b and i even updated the chipset drivers, but the problem just wont go away.

does anyone know what else i could do to fix my problem? ...

thanks, tosh


  • jakeleg

    360 Posts

    1133

    0

    Posted February 7th, 2004 15:00

    I think it might be an AGP chipset driver problem. Use the utility suggested in this link. Once you install it click on the chipset tab to see if the chipset AGP is enabled. 

    http://www.intel.com/support/platform/pentium4/checkorder.htm

  • lixuelai

    19 Posts

    1133

    0

    Posted February 7th, 2004 15:00

    btw, mine just crash, does ur cube spin for like a sec then stop or just don't spin?
  • lixuelai

    19 Posts

    1133

    0

    Posted February 7th, 2004 15:00

    iv had the same problem on an older pc, iv never been able to fix it. If ur problem is severe then disable DirectDraw altogether. That kills the Direct3D and AGP but it makes ur system run faster than if u turn down the videocard settings as an whole. Not a problem with driver or OS, i tried alot of ways to fix it including BIOS teawking but no luck.
  • tosh81

    12 Posts

    1133

    0

    Posted February 7th, 2004 16:00

    yes i have. the thing is that when i installed the newest catalyst from ati, it said radeon 9800 PRO in the control panel. what is that all about? i will try that ati one again though. but if i remember correctly it didn´t work eitther...
  • jakeleg

    360 Posts

    1133

    0

    Posted February 7th, 2004 16:00

    Ok, this is a real shot in the dark, but open up the dxdiag and go to more help, and then to override. Then set the override refresh rate to anything over 60. butis supported by your monitor.
  • jakeleg

    360 Posts

    1133

    0

    Posted February 7th, 2004 16:00

    Have you tried using the official ATi video drivers instead of DELL's?
  • tosh81

    12 Posts

    1133

    0

    Posted February 7th, 2004 16:00

    if i disable direct draw, will it still be possible to play actual games such as nhl2004 or nba live 2004? the thing is. right now i can play nba live 2004 without problems, but nhl 2004 wont run. just audio no video...
  • tosh81

    12 Posts

    1133

    0

    Posted February 7th, 2004 16:00

    thanks, i used that tool, but everything seems fine. agp 3.0 enabled and nothing weird with the other settings.

    i dont see that cube at all. my screen just turns black with a somewhat shining effect.

    other ideas?

  • tosh81

    12 Posts

    605

    0

    Posted February 7th, 2004 17:00

    plus i have the benq fp767 tft display. but i don´t think it has to do anything with he direct x problem, can it?
  • tosh81

    12 Posts

    1133

    0

    Posted February 7th, 2004 17:00

    what does it do? so you mean i can put it at 200 or 65 and it´s the same effect? do you have any experience with that