UNSOLVED

Illusion

updated

23 years ago

I

Illusion

1 Message

0

7347

April 26th, 2004 22:00

Precision 220 beeps on boot

it beeps 5 times, then 2, then 2, then 3. there is no video output, i have changed video card for known working card, no change.

does anyone know what this beep code refers to ?

 

Thanks

James

  • dan666

    5 Posts

    129

    0

    Posted May 2nd, 2004 13:00

    i just got a used dell presario and i opened up the case of it and i put in a few new chips and when i turned it on the same thing happened. then i took them all out and put them back in and when i turn it on it beeps 5 times and then 2 and then 2 again and my moniter doesn't turn on. does anyone know what this could be?
  • dan666

    5 Posts

    129

    0

    Posted May 2nd, 2004 13:00

    presision**
  • dan666

    5 Posts

    129

    0

    Posted May 3rd, 2004 11:00

    I found out what the problume is. When your PC beeps 5-2-2-3 this is what it means:

    Mismatch RDRAM device cout Replace RIMM pair with supported matching device count.

    Before i replaced anything i just checked to make sure that my ram was all in properly and it wasn't, so check your ram before you go buying a new pair of RIMM's.

     

     

    dan