
UNSOLVED
BG
bill gates NOT
1 Message
0
3157
July 21st, 2004 13:00
dimension 4100 video cards - please help
Hi there,
how can i tell if my video card is PCI or an AGP? and could this be the reason for the following.
suddenly the monitor on the 4100 dimension system was blank. i have tried the monitor on a diff pc, and it works ok. i have tried the old card on a diff pc (a 8100 dimension system) and it was not ok.
i bought a new card, an GeForce pro AGP 128mb, (what dell is shipping with current models near enough). however this new card while it would work in the newer 8100 system, would not work in the 4100.
i have the potentially 'bust' card in my hand, but how can i tell what type it is so that i can order the exact one again.
lot of scribble on the back
some of which is below:, can anyone advise me on what to use, or indeed point out the problem (guarantee its not a card 'seating' problem)
DS/N Cn - 073RGY - 44571 - 08J - 6271
BRD-05-E15 REV .C
am i right in thinking the reason my new card wont work in the old Pc is because the old 4100 can only take PCI cards not AGP cards? or am i barking up the wrong tree..
many thanks in advance(first time poster)
Responses (3)
Solutions (0)
- Hi Bill Gates NO,
I also have a Dell 4100 and am having trouble with the VIDEO card. (32MB NVIDIA TNT2 AGP ).The computer will not
load desk top. At start up I get BLUE screen that says "
Windows protection error. You need to restart your computer. System halted." The only way I can get desk top is using start up disk and I get desk top in safe mode only.
Did you have the same problem or was it different?
The resource CD loads and says incorrect drivers.
Have downloaded updated drivers from NVIDIA web site and they did work. 1.This makes me mad the computer is only three old. 2.Dell gives us the cd with drivers and it does not work.
Will you e mail me and let me know it you find a Video card
that works in your 4100?
I am frustrated and ready to trash this 4100.
Thanks.........carp denniscarpenter@verizon.net

Dale Nihiser
2 Intern
•
2030 Posts
135
0
Posted July 21st, 2004 17:00
bg not
Your 4100 has an agp slot. To confirm, simply look at the pin arrangement on the old vid card and compare with your new one. If they are the same, you have an agp slot in your 4100.
As I understand your old vid card no longer works as you have tested it and the monitor on your 8100. Plus you have tested the new card in the 8100 with the monitor too.
Here are some areas to check:
a) I don't know what brand your old vid card was, but if it was an ATi branded card, you need to completely remove any driver remnants before trying to install an Nvidia card and drivers. They don't play well together.
b) You may need to update drivers for the new Geforce card.
c) I'm not familar with the Geforce pro nomenclature you list. You need to be more specific, e.g., Geforce FX 5200. It is possible you may have purchased a card whose power requirements exceed what the 4100 is able to provide.
d) Finally double check all connections are secure.
Dale
Dimension 4100 (Old Paint)
866MHz Pentium III----->1.2GHz Tualatin Cele--->1.6GHz
LinLin 370 socket adapter (geekverter)
Intel A10 Bios
256Mb Sdram 133Mhz fsb
Ati Radeon 7500 64Mb DDR Ram
Sound Blaster Live Value!
Ctx 19" monitor
genericcdrom
generic cdrw
30Gb Seagate 7200rpm HD
WinME (all updates)