Power Supply is too small in SFF this is not supported.

Intel® Core™2 Quad Processor Q9650
(12M Cache, 3.00 GHz, 1333 MHz FSB)

 

But why does the technical Guidebook list the Q9650 (page 11)?

I would assume they were sold in that config?!

TDP of Q9650 is 95W

TDP of E8600 is 65W

Oh sorry i was wrong, it is not the SFF! I have the Desktop Version.

(i thought USFF was the smallest one, sorry)

The technical Guidebook

(https://www.dell.com/downloads/global/products/optix/en/desktop-optiplex-960-technical-guidebook-en.pdf)

Says the Q9650 was sold. (see page 11)

Regards,

Simon

Are there different Versions of the Q9650 that might explain this?

I checked the CPU in another non Dell PC and its working there.

Regards,

Simon

Power Supply is too small in SFF this is not supported.

At Microsoft, I used a 960 SFF factory-equipped with a Q9650. It's definitely supported.

Power Supply Wattage
TOWER 305W
Desktop 255W
SFF         235W

Incompatible  CPU

Request Denied.

The VRM's on the board are not removable. So it may be a board revision issue/Chip set Eratta.  The Bios will clearly state unsupported processor system halted. I'm not accountable for mistakes in manuals or part descriptions.

This wouldn't be the first Optiplex/Precision model that supports a CPU that ALL MODELS OF THE SERIES don't support.

You cannot wish a feature into a board or power supply. Just because the series and bios supports it does NOT mean that it supports all series all models ad infinitude forever.

There may even be specific S Spec that work and others that do not.

The Optiplex 520 is classic example of this where 130w pentium D processors are not supported but 90W versions of the same processor different S spec are supported.

"The Bios will clearly state unsupported processor system halted"

Thats exactly the message i get...

 

I also bought a second replacement Mainboard on ebay where the seller statet it supports the Q9650. But it does not work either :-\

Too bad.... I would really love to use the CPU i have now laying around for months :(

I believe I stumbled upon the root cause of the quad core issue.

I have a several 960 SFF and was getting the same message with a quad core. I also upgraded the RAM to 8 GB and re-installed the original processor and got this message:

"Quiet  Configuration Disabled due to incompatible memory configuration."

A quick search turned up this Dell article:

dell.com/support/troubleshooting/ch/de/chdhs1/KCS/KcsArticles/ArticleIframeView?docid=DSN_59C9DF02D7486641E040AE0AB7E15E8F&doclang=DE#Issue5

The last paragraph is what I feel relevant to the OP's question:

"The following error message will halt the computer and will not complete the POST process:

• If the user installs an unsupported CPU (i.e. a Quad core), the following message appears:
  Alert! Incompatible processor detected. System Halted.

To resolve this error reinstall the original CPU, or if the CPU was intentionally upgraded, purchase the correct Quiet Kit fan and heatsink from Dell Spare Parts."

Hi!

Thank you very very much for posting this! I am quite certain this is my problem as is also got the message with "Quiet configuration disabled" some time ago.

Too bad i sold the Quadcore some time ago and can not try this.

Regards,

Simon