Help

Start a discussion
UNSOLVED

rpoppster

updated

21 years ago

R

rpoppster

3 Posts

0

2740

August 15th, 2005 17:00

Capture video

Hi,
Trying to capture video from newer JVC camcorder to new Dell w/ Sonic software.
PC doesn't recognize the camcorder as a source using the USB ports.  Not sure why, I've read on these boards that firewire connection is preferable(?)... I have a IEEE connector on the cam, haven't checked the PC yet, may have to add that card.
Is IEEE prefered over USB? Why? or why not, or comparable?
 
Also, maybe the Sonic doesn't capture because everything needs to be turned on in some specific order, which I have not seen anywhere.
 
Thanks very much. 
  • C

    Casey101

    17 Posts

    104

    0

    Posted August 16th, 2005 03:00

    My new Dimension 4700 doesn't recognize my CANON ZR200 using the USB ports either. DELL swears its the cable or the camera. Make sure the connection switch on your camera is set to card instead of video. If it still doesn't work try connecting to another computer. Read the instruction book. If it still doesn't work with another computer its probably something sent by the camera or the cable (very unlikely) is bad.
  • DC

    DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    104

    0

    Posted August 16th, 2005 15:00

    rpoppster,

    Please read through this Photo and Video Editing FAQ . Also, repost this message on the Photo and Video Editing board.


    DELL-Chris M (old account)
    #IWork4Dell

Dell Support Resources

Latest Solutions

View More