UNSOLVED

RDB77

updated

25 years ago

R

RDB77

76 Posts

0

3084

July 3rd, 2001 12:00

All input welcome

Greetings everyone,

I post this in hopes that those with much more computer knowledge than my self will give me their honest input as to what I could and should do now. Here goes;

As some of you may recall I have had lots of lock up/freeze ups and tons of fatal exception errors. Now after having Dell tech run me through debug, fdisk, and reformat-reinstall 4 or 5 times, I stopped calling them and tried trouble shooting this with the help of this forum. Much thanks goes to all those that have helped me out. Now I have tried switching OS from ME to 98SE and still get problems. Is there anything else besides going through the whole clean install process again that could help me out? Is there possibly something else causing all the problems? I posted a message for Mike and Chris in customer service asking about possibly getting a new hard drive and OS cd. But while I'm waiting for their reply, what do you all make of this? If I get a new HD and OS would that solve the problem? Even if I do get a new HD, is there something else in the computer that can be causing all this? Once again, my computer knowledge is limited and I don't exactly know what else could be the problem. I have now done the whole clean install about 9 times now and have run out of ideas. Thats why I turn to you good people in hopes that you can help me wrangle this bad boy.

Thanks for your time

Ronnie

Dimension 4100 P3 1ghz
384mb of sdram 133mhz
20gb ultra ata HD 7200rpm
12x Samsung d-612 DVD-ROM
8x/4x/32x CD-RW
Conexant HCF v.90 56k RTAD
SB LIVE! Value
32mb NVIDIA GeForce2 MX 4X AGP
Orginal OS is WinME
Current OS is Win98SE

  • Norman E

    84 Posts

    605

    0

    Posted July 3rd, 2001 13:00

    Ronnie,

    Greetings from England.
    It seems to me that if you get the same problems with either OS, then the problem lies elsewhere. I am not sure that changing the hard drive will help, unless Scandisk reveals that it has problems like bad sectors. It is my experience that software rather than hardware causes most problems. Yours may be due to some program which is corrupted. Removing programs one at a time to see if the problems go away is time consuming but may be the best way forward. I suggest you post a list of all your programs, including particularly all the applications that are always running in the background. I have found that Dell's System Configuration Card utility will give you a comprehensive listing of both hardware and software. I was amazed at the length of the list of software it revealed as installed on my machine. Post the list and hopefully one of the more expert members of this forum will be able to guide you as to which programs are the most likely sources of your problems.

    All the Best, Norman

    Dell 4100. P111 933
    128 MB
    Nvidia Geforce 32 MB
    IBM 45 GB hard drive
    Sony CD RW
    12X DVD
    Windows 98 SE
  • RDB77

    76 Posts

    605

    0

    Posted July 3rd, 2001 14:00

    Thanks Goonboy,

    I will try that today. But again, how long would you recomend I wait to see if the program is at fault.

    Thanks again to the ONE and ONLY Goonboy. Glad to see that other joker kicked off

    Ronnie

  • RDB77

    76 Posts

    605

    0

    Posted July 3rd, 2001 14:00

    Thanks Norman

    What is this Dell system configuration card utility, and where do I get it? I have often wondered about some of this software myself. I keep all of the Dell programs like e-solution and whatnot off the system. The first program I suspect is Dell/Net, I'm not entirely sure. As of right now I only installed the software for my soundcard, Dell/Net, and 1 program that comes with my HP scanJet 4300c.
    In the background I am aware of only systray, explorer, Stimon(still image monitor-this is required for my scanner) and of course cystol(sound).
    That is good advice though, the next time I clean install I'm going to leave my printer, scanner, and Dell/Net off and see what happens. However how long do you think I should let it go before I rule out one program and install another?

    Thanks again
    Ronnie

  • Goonboy

    2 Intern

    •

    2433 Posts

    605

    0

    Posted July 3rd, 2001 14:00

    Just as a follow up to Norman's advice, since Dell's System Configuration Utility is currently MIA, you can download/install the stand-alone version of what they used (Belarc Advisor) for free here.

    Accept no substitutes!


    Get out!  Leave while you still can!  Aiyeeee!
    Click Here

    Shortcut to DellT@lk users FAQ Web Site - Opens in a new window.


    No one is ever completely worthless - they can always be used as a bad example.


    Message Edited on 07/03/01 11:11AM by Goonboy








  • RDB77

    76 Posts

    605

    0

    Posted July 3rd, 2001 14:00

    Thanks

    I was going to only install one thing at a time after a clean install and check it that way since I have to re-install anyway due to clean installing with the printer and scanner still attachd..DUH!. One question however, I really do think Dell/Net might be the culprit, if thats so, would Norton which is on the same cd also be corrupt?

    Ronnie

    By the way, that BeLarc Advisor is amazing(and scary), thanks for the link.



  • Goonboy

    2 Intern

    •

    2433 Posts

    605

    0

    Posted July 3rd, 2001 14:00

    I suppose it's possible, but I don't know enough about how that stuff works to be sure. You might try contacting Dell to see if you can get a new CD that contains those items, just to be on the safe side. There was a bad batch of Resource CDs released with 4100s around Christmas time, and they got a new one of them to me within 2 or 3 days. If the stuff is on the Dell Installed Applications CD, I think they have them made up ahead of time, and there's no reason why they couldn't overnight one to you, if you suspect there's a problem with yours.

    Goon Sig Lite  Looks great-less filling!


  • Goonboy

    2 Intern

    •

    2433 Posts

    605

    0

    Posted July 3rd, 2001 14:00

    Ronnie;

    That's probably going to depend on which program you have disabled as part of the process of elimination procedure, but if you run through a variety of tasks that you were having problems accomplishing before a specific item is deleted, and suddenly find that everything is working, I guess that would be pretty sufficient indication. Just remember to re-boot in between each removal, as this is your best way of ensuring that the program is "out of the loop."

    Accept no substitutes!




  • kalephunk

    18 Posts

    605

    0

    Posted July 3rd, 2001 18:00

    If you've already done a full clean/restore and the problem still persists, you might want to check the fans/airflow in your computer. I just worked on a machine that had fans mounted directly on the CPU and they had stopped working for whatever reason -- and THAT was the cause of frequent lockups. The computer would simply overheat and shut down to avoid going up in flames. Simply replacing the fan solved all the problems.

    Check your fans and make sure they're running optimally. Make sure the heatsink on your CPU is mounted correctly, and that the heat gel stuff is still there (the little pad that lies between the CPU and the heatsink). I don't think Dell motherboards come with system thermometers, so if you want to get a good reading, get a third party computer thermometer that mounts on the motherboard (RadioShack).

    Heat may not be your problem, but it is the one thing that I've found to be the most overlooked source of computer problems. Never hurts to check.

  • Norman E

    84 Posts

    605

    0

    Posted July 4th, 2001 08:00

    Ronnie,

    I noted your refernce to your printer, and recollect seeing a post on this board from someone who said that if you have a printer connected to the computer when you load the operating system it may result in some corrupted files. I do not know how that might happen, but just in case it does I suggest that if you do have to reinstall the OS you should physically disconnect any external peripherals first.

    Sorry that I had not noticed that the System Configuration Card utility was missing from the Dell site. It is Belarc, but used to be on a link from the Dell homepage.

    All the best, Norman