UNSOLVED
Using Optical Out/Toslink for Audio
Hi all -
First post. I got my X51 yesterday and so far am very happy with it. I have connected my X51 via HDMI to my Samsung TV and get audio/video. However, I want to output the sound from it via my optical cable via the optical out port. The port emits the usual red light, and the cable has been confirmed as working. However, I get no audio.
What settings do I need to tinker with (guessing sound in control panel) to get the sound I am after?
4101
0
Posted December 17th, 2012 09:00
I tried to enable the card as default but am having no luck. Called tech support, and they were not knowledgeable, suggesting that I even plug the TOSLINK cable into the regular 2.5mm jacks :p
Could you let me know what settings you used? Was it in control panel > sound?
Sorry for the hassle, but would be great to at least see the names of the selections you made.
4100
0
Posted December 17th, 2012 09:00
Suggested to plug the TOSLING in the 2.5mm jack? HAHAHAHAHAHAHAHA
As for the exact settings, I dont remember by heart, and I'm at work, I cant check :( I think it was on the setting of the card, you have an ôption to choose the output.. I will check tonight, and if you dont solve the problem by then, I will post a screen or something :)
4100
0
Posted December 17th, 2012 13:00
Yes, you have to make that port "default" in Control Panel / Sound.
Also, if using HDMI straight to a TV with speakers, it might not like to use optical instead. If using optical, better to use DVI-1 port instead (not HDMI out).
So, no amp ? ... or your amp isn't HDMI compatible?
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired)
- Like many of you, I can appreciate a good game-engine.
- I answer questions here, but I'm not a Dell employee.
- Consider giving posts you like a "thumbs-up"
- Posting models-numbers and software versions speeds trouble-shooting.
- Click "Mark as Accepted Answer" on any post that answers your question best.4100
0
Posted December 17th, 2012 16:00
How is it hooked up exactly (see above).
I might not be able to help you further. Your English is so good, I thought you used English Windows. I can't read that, sorry.
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired)
- Like many of you, I can appreciate a good game-engine.
- I answer questions here, but I'm not a Dell employee.
- Consider giving posts you like a "thumbs-up"
- Posting models-numbers and software versions speeds trouble-shooting.
- Click "Mark as Accepted Answer" on any post that answers your question best.4100
0
Posted December 17th, 2012 16:00
When I right-click on the volume icon, I have this menu. Last option shoudl be in english "Volume control option" or something like that. It give me the menu behind where I can choose the output. I guess its there.
?
4200
0
Posted December 18th, 2012 06:00
Thanks all, will try it at home when I finish work.
4100
0
Posted December 18th, 2012 06:00
Ho, everything work fine on mine, was just trying to help Stazi. But unfortunately, my Windows is in French :|
4200
0
Posted December 18th, 2012 10:00
Ho, everything work fine on mine, was just trying to help Stazi. But unfortunately, my Windows is in French :|
Oh, ok ... good. Actually, I can make-out some of that (but not the needed 100%).
You bi-lingual people amaze me.Pretty sure Stazi's problem is they are trying to use Optical SPDIF and HDMI-TV at the same time ... not going to work well.Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired)
- Like many of you, I can appreciate a good game-engine.
- I answer questions here, but I'm not a Dell employee.
- Consider giving posts you like a "thumbs-up"
- Posting models-numbers and software versions speeds trouble-shooting.
- Click "Mark as Accepted Answer" on any post that answers your question best.1159
0
Posted December 19th, 2012 08:00
Well, I tried it..no luck. What I'm going to have to do is to try and connect via DVI though that's less than ideal. You would think a computer could tell when you have certain items plugged in
Leodagan
111 Posts
4101
0
Posted December 17th, 2012 09:00
If I remember correctly, you have to specify which output you are using, between the digital/optical or other output. I'm pretty sure I had to do this on my Aurora, because the default output was not the optical one.