UNSOLVED

emcprof

updated

19 years ago

E

emcprof

6 Posts

1

2861

August 28th, 2007 08:00

EMC -Solutions Enabler problem

I have installed Solutions Enabler V6.2.2 on a solaris 9 machine. I having problems in running the symapi secure daemon and I get an error
"The lock attempt on the gatekeeper path or SYMAPI database file failed" .

Did some search and it says it is because of the locked semaphore which I need to kill but cannot find any semaphore in the locked state.

Any ideas and a quick solution is very much appreicated
  • munish2

    17 Posts

    1012

    0

    Posted August 28th, 2007 08:00

    how did you check the locked semaphores ?
  • emcprof

    6 Posts

    1014

    0

    Posted August 29th, 2007 01:00

    I get the list of semaphores currently in use by running the following command:

    symcfg list -semaphore

    I also verify if SYMCLI commands are running and if no SYMCLI commands are running, remove semaphores labelled as locked by running the following command:

    ipcrm -s semaphore ID.

    If no SYMCLI commands are running but the semaphores show locked, remove them also.

    After removing the semaphores, you should be able to run a symcfg discover successfully.


    After doing all this I am getting the same error.
  • xe2sdc

    6 Operator

    •

    2831 Posts

    1014

    0

    Posted August 29th, 2007 02:00

    1) a snip of the symapi log may help identifying what's broken
    2) do you have Oracle (or other applications) running on the same host ??

    maybe Oracle (or other applications) are consuming semaphores and when symapi needs a lock simply can't find a lock since they are already used by someone else .. It happened to me in the past .. maybe it's happening also to you :-)
  • emcprof

    6 Posts

    1014

    0

    Posted August 29th, 2007 03:00

    I am checking the symapi log and the last line of it shows the following

    08/28/2007 16:35:20.899 9131 1 EMC Corp log_lock_status Gatekeeper|Database lock failed with APILCK error APILCK_C_DASEMGET, lock result is 13 (/var/symapi/db/symapi_db.bin) OBTAIN function #s 0 0 0 0 0

    I have oracle database running on this machine.

    Let me know if this helps
  • xe2sdc

    6 Operator

    •

    2831 Posts

    1014

    0

    Posted August 29th, 2007 05:00

    Yes .. the mesage (APILCK_DASEMGET) pointed to a very limited number of primus solutions .. Let me pose another (and hope final) question .. Are you using Veritas on the host ??
  • xe2sdc

    6 Operator

    •

    2831 Posts

    1014

    0

    Posted August 29th, 2007 05:00

    I get the list of semaphores currently in use by
    running the following command:

    symcfg list -semaphore

    I also verify if SYMCLI commands are running and if
    no SYMCLI commands are running, remove semaphores
    labelled as locked by running the following
    command:

    ipcrm -s semaphore ID.

    If no SYMCLI commands are running but the semaphores
    show locked, remove them also.

    After removing the semaphores, you should be able to
    run a symcfg discover successfully.


    After doing all this I am getting the same error.


    Try to get the full list of semaphores .. Sometimes Solution Enabler leaves some locks .. and forgets about them :-) .. And it happens usually when you upgrade solution enabler ...
    Run an "ipcs -s" to show the full list and search for locks beginning with 0x45 .. If no sym* process is running, shutdown all the stor* daemons and remove the locks as per primus emc19899
  • emcprof

    6 Posts

    1014

    0

    Posted August 29th, 2007 06:00

    yes veritas volume manager is being used on the machine.Please let me know if you need any other info.
  • xe2sdc

    6 Operator

    •

    2831 Posts

    1014

    0

    Posted August 29th, 2007 07:00

    If you are using Veritas VM please look if you can find in the symapi log the following string:

    SYSCALL_FORMAT_NOT_SUPPORTED

    If you can find this string, please look at the value of the "SYMAPI_USE_VXDMP_GATEKEEPERS" in the "option" file. The value should be DISABLED as per Support Solution emc54732 ..

    Message was edited by:
    Stefano Del Corno
  • munish2

    17 Posts

    618

    0

    Posted August 29th, 2007 10:00

    Hi Vijay,

    Please ensure you have set the correct values of semphores in system file as per solution enabler installation guide instructions.

    Regards,
    Munish
  • emcprof

    6 Posts

    633

    0

    Posted August 30th, 2007 00:00

    Sorry i cannot find any of these parameters,any other suggestions will be very useful.