First time post here! I have a group of Dell UD22 docks (3 docks) and they all seem to have the same issue.
When looking into device manager there seems to be a device listed under Universal Serial Bus controllers that state Unknown USB Device (Port Reset Failed). This only appears when any of the Dell docks are hooked into any laptop, I connect them to be it a Dell Inspiron DC16251 or a Lenovo ThinkPad E16 Gen 2.
When trying to update the firmware on these units, which as of this post is A08, the program fails to read the version on the PD chip. Even though the program fails to update the PD firmware, it did update the MCU and HUB firmware. VMM chip update does not go through, I assume it's because the program fails to update the PD firmware.
The docks do seem to work with Dell systems without much issue. When using them with any other systems IE Lenovo then they fail to boot up when powering on.
I have tried this with two different docks with no difference. I think I'm more worried about the device manager issue and non-Dell systems not being able to boot properly when hooked up to the dock.
Having the exact same issue on two UD22 docks now. Both connected to Dell monitors and Dell Laptops. The issue started with random blanking out of monitors. Tried updating drivers and I am getting the "Undetected" when trying to update to the latest firmware (WIN64_1.0.18.24_A08). I did also try some older releases with the same results.
JawboneArt
1 Rookie
•
3 Posts
•
10 Points
7
0
Posted June 26th, 2026 10:56
I have tried this with two different docks with no difference. I think I'm more worried about the device manager issue and non-Dell systems not being able to boot properly when hooked up to the dock.