UNSOLVED

Shanavaz2

updated

19 years ago

S

Shanavaz2

14 Posts

0

1616

September 20th, 2007 06:00

UNCLAIMED in the ioscan

The HP server can see the frame, the devices are seen ( the hardware paths are seen on the server) but it says UNCLAIMED in the ioscan. The device configurations are ok on the clarion side and zoning looks to be fine.

Any idea about the cause of the problem ???
  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    991

    0

    Posted September 20th, 2007 06:00

    run insf ..and see if they get claimed.
  • xe2sdc

    6 Operator

    •

    2831 Posts

    991

    0

    Posted September 21st, 2007 01:00

    Dynamox maybe I'm wrong .. But I remember that the "unclaimed" state refers to a device correctly detected at the hardware level but that lacks the appropriate device-driver in the kernel ... I think that insf needs a device driver available before creating the special files since insf needs to know the major number of the device driver before creating the sf.. :-)
  • Shanavaz2

    14 Posts

    991

    0

    Posted September 21st, 2007 08:00

    I would add more information to the existing problem:
    The HP server can see the devices assigned from CX-700 , recently new devices were assigned from CX-3-80 and the devices are in UNCLAIMED state.

    Below are the details of HP server details:

    HP Superdome / HP-UX 11.11
    HBA that connect to clariion:
    /dev/td8
    HBA model : A5158A
    h/w path : 0/0/12/0/0

    /dev/td2
    HBA model : A5158A
    h/w path : 0/0/14/0/0

    Is there any setting or patch update we are missing here ???
  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    991

    0

    Posted September 21st, 2007 10:00

    are these patches installed:

     PHCO_27780
     GOLDBASE11i (September 2005 or later)
     GOLDAPPS11i (September 2005 or later)
  • Shanavaz2

    14 Posts

    991

    0

    Posted September 24th, 2007 00:00

    Below are the version details:

    FC-TACHYON-TL B.11.11.09 PCI/HSC FibreChannel;Supptd
    HW=A6684A,A6685A,A5158A,A6795A
    FCMassStorage B.11.11 Fibre Channel Mass Storage
    PHKL_34161 1.0 Fibre Channel Mass Storage
    Patch
    PHSS_31326 1.0 Tachyon TL Fibre Channel Driver
    Patch

    Do we still need PHC0_27780?
  • Shanavaz2

    14 Posts

    991

    0

    Posted September 24th, 2007 19:00

    The server bus instance number has reached the maximum limit .This is reason the new disk cannot be claimed.
  • xe2sdc

    6 Operator

    •

    2831 Posts

    991

    0

    Posted September 25th, 2007 00:00

    Wow !! So you had to rebuild the kernel and reboot ?? Or hpux now allows to modify some kernel parameters while running ??
  • xe2sdc

    6 Operator

    •

    2831 Posts

    991

    0

    Posted September 25th, 2007 03:00

    You have to modify the ioinit startup file ... Not a trivial task ..

    I've tryied a couple of time .. one I had luck .. forget the other ;-)

    Usually there is no need to renumber ALL the controllers .. Usually you simply remove dead entries so that there is another "slot" for the next ioscan .. But usually you leave the old instances at their places :-) .. But it's up to HP to decide what's best for you ;-)

    If I do remember well you have to boot first in single user, dump the ioinit database to a file, modify the file (removing unwanted entries) and then boot again with the new ioinit.
  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    991

    0

    Posted September 25th, 2007 03:00

    we had this problem as well, over the years our HPUX superdome got connected to many arrays/FAs ..so one day we had to present another FA ..and it would not create any devices on that hardware path. HP support has a script that will delete dead hardware paths, i don't remember exactly but i think it re-numbered all hardware paths, so you might have to re-import your volume groups. It also required two reboots.
  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    185

    0

    Posted September 25th, 2007 04:00

    if i were the system admin, i would still have my map files handy :)