One of my CX3 customer is interested to have a maintenance contract signed with my company. Before doing that I am planning to do a health check of the SAN. Which tool I can use?
I understand you are an EMC Partner and had appropriate access to resources. You can grab SPCollects from the SPs and then run it via CAP2 tool which will provide you the detailed report on that Array.
Also you may use another internal tool, if you have access to it - called TRiiAGE which is a tool used to expedite the reading and the analyzing of spcollects - this provides a list of all issues, if any on the array as well.
To check the status and health of the Storage Processors - please run SPQualifier tool.
All these are available on the restricted/internal CLARiiON Support Website. If you don't have access - please get in touch with your EMC contacts.
Lastly - you may engage EMC CLARiiON Support team to perform a healthcheck for the array - but in this case, since the array seems to be not under EMC support, this option may not be an option.
nandas
6 Operator
•
1473 Posts
245
1
Posted October 13th, 2008 07:00
I understand you are an EMC Partner and had appropriate access to resources. You can grab SPCollects from the SPs and then run it via CAP2 tool which will provide you the detailed report on that Array.
Also you may use another internal tool, if you have access to it - called TRiiAGE which is a tool used to expedite the reading and the analyzing of spcollects - this provides a list of all issues, if any on the array as well.
To check the status and health of the Storage Processors - please run SPQualifier tool.
All these are available on the restricted/internal CLARiiON Support Website. If you don't have access - please get in touch with your EMC contacts.
Lastly - you may engage EMC CLARiiON Support team to perform a healthcheck for the array - but in this case, since the array seems to be not under EMC support, this option may not be an option.
Hope these helps.
Thanks,
Sandip