rama_maddodi

updated

16 years ago

R

rama_maddodi

1 Rookie

•

66 Posts

0

2762

October 26th, 2010 14:00

Cannot access one of the Centera Access Nodes.

Hello Everyone,

I have a 16 node centera with 2 access nodes on it. I can ping one of access nodes, but i cannot ping the other one. I logged on to centera through Centera CLI and checked out the status, and its show up and on. But I still cannot ping the one of the access nodes. Any idea what I need to do.

Thank You

Rama

  • Phukon

    1 Rookie

    •

    337 Posts

    1680

    0

    Posted October 26th, 2010 15:00

    Hello Rama,

    Are you using Centera ping? However You may check the following:

    • First check if the cables are connected properly to the node,
    • Ensure the Lan cable is blinking,
    • Check if the node is online from Centera Viewer (Can be logged in as admin).
    • You can also create a service Request with EMC Centera Support to troubleshoot it further.

    Cheers,

    Phukon

  • rama_maddodi

    1 Rookie

    •

    66 Posts

    1680

    0

    Posted October 26th, 2010 20:00

    Hello Phukon,

    thanks for getting back on me. Yep I checked it with centera ping. It gave centera node access error with code error 102202, I dont remember the exact error code number. And yes when I log on to centera viewer, I can see the access node "on", and I checked the physical connection doesn't look anything wrong on it. But anyways I opened up a SR with EMC, will get in touch with tomorrow morning to resolve the issue.

    Thank You

    Rama

  • Phukon

    1 Rookie

    •

    337 Posts

    1680

    1

    Posted October 27th, 2010 11:00

    Hello Rama,

    I have identified few more options:

    • You can also check the security status of the node, (if the node is locked) use the command in the CV CLI

                                                    set security unlock all

                                              or   set security unlock

    • May be the file ApplicationProfileManager.cml located in the filepool directory could be corrupted, it is fixed by support only by copying the file from a healthy node

    Good Luck,

    Phukon

  • rama_maddodi

    1 Rookie

    •

    66 Posts

    1680

    0

    Posted October 28th, 2010 10:00

    Well got the problem, why I was having problems, as one of the access nodes was clocked on to 100 Mbps and other access node was on 1000 Mbps. And the access node with 100Mbps, which I could ping or access it had a NIC card failure. I had to call EMC CE to come and replace the node. And right now I can access both the nodes fine.

    Well thank you every one for all the valuable information. Gained a lot of knowledge on Centera because of this issues.

    Thank You

    Rama