Thanks Sebby I will try the Clariion board.

Good morning.

Could you give a little more detail as to what you're looking to do?  Please note that the NS-42 needs the backend to be able to boot up, so be careful with removing the control LUNs used by this.  Any sort of hardware reconfiguration/repurposing will require an engagement with an EMC field rep.

Thanks.

Sebby Robles

EMC Celerra Support

Will you be removing the data LUNs then?  If so, you'll need to permanently unmount the filesystems and delete them.  Then you'll need to permanently delete the disks from the Celerra.

If this is not the case and you're just looking to create new RGs/LUNs on the backend I would recommend posting your query on the CLARiiON Support Forum.  They may have the proper documentation you require.

Thanks.

Sebby Robles

EMC Celerra Support

Sebby,

I need to completely reconfigure the Clariion backend to different raid

groups and LUNS. This was setup for iSCSI and will be using the same protocol

however the user has requested different size LUNS etc. I will not be

touching the control LUNS.