UNSOLVED

Ivesy

updated

20 years ago

I

Ivesy

20 Posts

0

2921

July 4th, 2006 17:00

Why does my PC boot up with Pentium D inside logo?

My PC used to (up until tonight anyway) boot with the Intel VIIV logo when the PC is first switched on now it says Pentium D! anyone know hay this has happened?

While i'm here I've been having trouble with Mcafee firewall and virus scan. To cut a long story short I've uninstalled it and installed Avast anti virus and Zonealarm these appear to working fine. I've also reset the PC to the state it was in when I purchased it about 2 months ago. I've noticed the PC seems to take about twice as long to boot.

It used to take 30 seconds from switching the PC on to getting the desktop now it takes around 1min 20. The slowest point of the boot is when I get to the blue welcome screen, this used to literally flash on the scree and the windows welcome tune was still playing when the desktop had appeared. Now the tune has finished and the desktop isn't showing for another 30 seconds or so.

I've scanned it it for viruses, trojans and ad ware and found nothing. Is it worth contacting Dell? I'd be really grateful for any help in this matter!
  • 148

    0

    Posted July 4th, 2006 19:00

          about the McAfee part are your icons grayed out? (if they are all you should have to do is verify your subsection I've had that happen before)

         your Pentium and VIIV problem, (by the way it sound you have both on your computer) if thats the case i pretty sure theirs a way to change it back but you have to do it when your computer is stating up ,the black screen with the blinking _ , but you should need to contact Dell for what to type in.

     Also you way want to check if you have a ton of fragmented files that can explain why its running so slow

     

                                          hope this helps any sincerely

                                               Packer-backer

  • ROBERT C

    19 Posts

    148

    0

    Posted July 4th, 2006 20:00

    I had  similar problem With the logo...I accidentally turned off the-HT...And it changed my logo from pentium 4 HT to just pentium 4... Had to go into bios And to CPU  To turn it back on again ..You may have to do the same thing .
  • Ivesy

    20 Posts

    148

    0

    Posted July 5th, 2006 16:00

    Thanks for that I'll give that a go!