UNSOLVED

Dr. T

updated

23 years ago

DT

Dr. T

7 Posts

0

3110

December 22nd, 2003 23:00

Dell OpenManage client detection problems

Hi all,

I've been having trouble setting up the OpenManage software.  Can anyone help me?

I've installed the IT Assistant on the server, and the Client Instrumentation software on one machine to test it on.

When I run the IT Assistant and discover the target client, it seems that the instrumentation is not detected.  It successfully finds the client (name, IP, and Mach address) but no features are supported such as Remote Shutdowns, BIOS updates, Boot order sequence changing, etc.  Also the discovered machine goes into the "unclassified" category for some reason.

There's no configuration utility for either the IT Assistant or the Client Instrumentation software, so I don't know how to check whether some settings need to be changed.  I've therefore just left everything on default because I don't know where to change the settings.

Any help would be appreciated.

Thanks.

 

  • Hydralisk00222

    2 Intern

    •

    2440 Posts

    155

    0

    Posted December 24th, 2003 13:00

    You should really post this in one of the OptiPlex forums if you need an answer.