
Solved!
Go to SolutionClosed
VNXe3200 - The DPE has faulted because of SP fault
We have a VNXe3200 reporting a major issue, although everything seems to be working fine. In addition to the message in the subject line of this post, I see one other related alert: "The system has experienced one or more major failures, which have significant impact on the system. You need to take immediate action. Check related alerts and fix the underlying problems."
How can I access more detailed logs in order to determine the cause of this issue. I suspect a battery failure, as we've encountered that issue before, but I'm not sure how to confirm it.
We are running System Software version: 3.1.14.10199487, one of the earliest versions that no longer requires Adobe Flash support.
Thanks!
Responses (13)
Solutions (0)
It appears that I can connect to the VNXe3200 using SSH, but I don't know what credentials to use. I've tried the admin credentials used to sign into Unisphere, but those don't work. What credentials are required for SSH access, and are there commands that I can use therein to get further information on the DPE fault?
DELL-Josh Cr
Community Manager
•
9801 Posts
•
45350 Points
483
0
Posted July 5th, 2023 07:00
It uses the service account. Here are the commands https://dell.to/3NZNmQJ
Thank you for your response. Unfortunately, I don't see any option for generating diagnostic files in the installed version of Unisphere.
Is this option available in this version of Unisphere? In the meantime, I'm looking into using the IPMITool to get more information on the DPE fault.
DELL-Josh Cr
Community Manager
•
9801 Posts
•
45350 Points
496
0
Posted July 5th, 2023 07:00
Hi,
Thanks for your question. https://dell.to/449X6xn You can follow this to collect the logs and see what the errors are.
Let us know if there is anything else we can help you with.
DELL-Josh Cr
Community Manager
•
9801 Posts
•
45350 Points
489
0
Posted July 5th, 2023 07:00
What does it show under the alerts tab?
DELL-Josh Cr
Community Manager
•
9801 Posts
•
45350 Points
479
0
Posted July 5th, 2023 09:00
the default password should be service. https://dell.to/3XDLvEp
Thank you. I already tried that password -- no luck. It seems that the version of Unisphere that I have is missing significant functionality. It doesn't appear that I even have the option to place a storage processor in service mode, for example. It appears that the IPMI tool is my best hope, so I'll start working on that option when I get on-site this afternoon.
I'll try this option also:
How to reset the VNXe System passwords to their default values - Dell Community

DELL-Josh Cr
Community Manager
•
9801 Posts
•
45350 Points
606
0
Posted July 6th, 2023 05:00
Yes, that is the right process for replacing the battery.