The VNXe 3200 can be ordered with a variety of disk configurations in the Disk Processor Enclosure (DPE). However, it's not clear to me where the vault drives are, what their raid configuration is, what the usable capacity is on them, and whether or not they can be allocated to a homogeneous/heterogeneous pool.
there's probably a white paper somewhere, but I haven't found it yet.
Just a follow-up... I did find this KB article on vault drive configurations on VNXe 3100, 3150, and 3300.
Now the VNX3 3200 can be ordered with 6 drives, 12 drives, and 25 drives (and 8 drives on the all-flash version). But, again, how is the vault configured on these disks?
The VNXe products have private system space created on the first 4 drives of the system (DPE Disks 0-3) and are physically marked with a yellow label. In the VNX products, these drives are referred to as the "vault drives" and can only be used in RAID Groups. In the VNXe products (3100, 3150, 3300, and the new 3200), these drives are referred to as the "system drives" and can be used in Storage Pools (RAID Groups are not available in the VNXe products).
On the VNXe system drives (DPE Disks 0-3), you will see a lower capacity when compared to non-system drives. For example: If your VNXe systems drives are 600GB SAS, the formatted capacity will be ~536GB but the usable capacity will be ~459GB (because the VNXe has ~80GB private system space allocated from each of the first 4 drives in the DPE).
Yes, you can use the system drives (DPE Disks 0-3) in a Storage Pool. When doing so, however, you will receive a warning message in the Unisphere GUI stating that you will see reduced capacity and performance for that portion of the storage pool that is leveraging the system drives.
Thanks for all the feedback on this thread. Maybe someday, EMC may choose a design for its midrange storage platforms that includes a pair of mirrored SSD’s in the back of the system, invisible to and unusable by the administrator.
The vault drives configuration of VNXe3200 is same with VNXe3100,3150 and 3300. They all use some space of the first four disk drives (Disk0 ~ Disk3) of the DPE to store the operating system data. VNX series also use Disk0 ~ Disk3 to store the operating system data.
For more detailed information VNXe vault drives, please refer to KB Vault drives of VNXe which is write by me before.
When creating a storage pool, can you choose not to use the first 4 drives of the VNXe? If I have 20 - 900GB SAS drives in the DPE, 4 of which are for the Vault, can I create a 15 drive 4+1 RAID 5 storage pool excluding the Vault drives all together? Do I have that type of flexibility. The 1 remaining drive would be a hot spare. I just want to know that I have the flexibility to carve up the VNX in the way I want.
Yes, what we typically do is configure the first 6 drives as 600 gb 10k, and use them for a "ISO" partition, where we store disk ISO's used to install VM's. That way the space isn't wasted, and if need be, you can delete it all and use that reclaimed space to migrate off of a full LUN.
If you really don't want to store data on them, you can order the first 6 drives as 300 GB drives and then there will be zero available space on those first 4 drives. However you then end up with 1 drive that is unusable, unless you buy several more 300 GB drives to create a Raid group with.
My recommendation is to save money on the first 6 drives, 600 10k or 900 10k, and use it for archival of non-critical data, then buy enough additional disks to use that 1 extra disk as the start of a 4+1 raid group or added to a storage pool.
Seems EMC would set this up to be 5 Disk instead of 6.
DPE 6 X 900 GB 10k, 3 x FC, 4 x 900GB 10k, 4 FAST VP
4 Drives Vault R5 = ~ 1.5 TB Archive
5 900GB 10k Perf = 1.8 TB Performance Tier
3 FC = 200 GB Fast Cache
3 FVP = 200 GB Extreme Performance Tier
DAE 5 X 2TB NL-SAS
8 TB Capacity Tier
This config gives you tiered storage, AMAZING speed, and plenty of scalability. You have room for 10 more NL-SAS drives, 8 more SAS/FC/FVP drives, without adding a DPE or DAE. The odd 8 number left in DPE gives me fits tho... I generally leave 3 slots open, and just get another 2.5 DAE if I grow further, cuz I like my drives in the 5 at a time range.
emarzock1
124 Posts
2357
0
Posted August 19th, 2014 07:00
Just a follow-up... I did find this KB article on vault drive configurations on VNXe 3100, 3150, and 3300.
Now the VNX3 3200 can be ordered with 6 drives, 12 drives, and 25 drives (and 8 drives on the all-flash version). But, again, how is the vault configured on these disks?
Thanks,
Eric