Storage Architect issue regarding the RG and pools
Hello,
Am pretty new to architect storage layouts or designs. I have 2 DAE's saying 25 disk each 600 SAS 15k drives which are 50 in total and one DPE with 21 disks obvious 4 vaults disks.
I need to design storage for the below requirement. I also have a RPA replication so i need journal volumes as well...
Datastores =12TB
Bootlun's = 320GB
Data= 6.8TB ( preferably R5 with meta's)
Arch== 3.2 TB (RG 1/0)
Journals= 10% of data and archive lun's
Can any one suggest me the best way to fit in this requirement. Thank you in advance.
I suggest to start with the Fundies document and the relevant VNX white papers.
All of the RAID and non-RAID logical storage objects are described in the EMC Unified Storage System Fundamentals for Performance and Availability document, a.k.a. the "Fundies" paper. Fundies is available on Powerlink.
It wouldn’t hurt to contact a local EMC technical guy in your area either.
TheEMC Unified Best Practices for Performance and Availability: Block OE 31.5 a.k.a. Best Practices should also be on the 'required reading' list. Although, a student of the dark arts should start with "Fundies'. Fundies and Best Practices are both available on Powerlink.
Rainer_EMC
6 Operator
•
8645 Posts
179
0
Posted February 3rd, 2012 11:00
Hi,
welcome to the game. Architecting isn’t simple.
I suggest to start with the Fundies document and the relevant VNX white papers.
All of the RAID and non-RAID logical storage objects are described in the EMC Unified Storage System Fundamentals for Performance and Availability document, a.k.a. the "Fundies" paper. Fundies is available on Powerlink.
It wouldn’t hurt to contact a local EMC technical guy in your area either.
Rainer