UNSOLVED
G
garethprescott
8 Posts
0
872
August 30th, 2011 23:00
SP utilization via SNMP...?
Hi
Is there a way to get SP utilization out of the VNX via SNMP or any other method?
And if so is there any performance impact on the array?
I’m working for a client that has a custom built dashboard with event and performance monitoring for all their infrastructure, they would like to add SP utilization.
Thanks
Rainer_EMC
6 Operator
•
8645 Posts
378
0
Posted September 5th, 2011 15:00
navicli –h getcontrol –busy / -idle also gets you CPU busy / idle percentage
Rainer
garethprescott
8 Posts
378
0
Posted September 5th, 2011 15:00
If not by SNMP, is there any other way of send these stats to a 3rd party console? How does ECC do it?
Thanks
Rainer_EMC
6 Operator
•
8645 Posts
378
0
Posted September 5th, 2011 15:00
I guess ECC is using the Solution Enabler
garethprescott
8 Posts
378
0
Posted September 5th, 2011 18:00
I think the navicli might just work for them, thanks
Kumar_A
2 Intern
•
727 Posts
378
0
Posted August 31st, 2011 14:00
No, this can be monitored in the Analyzer, but these statistics are not available through SNMP.