UNSOLVED
P
Perseo_37bdd2
19 Posts
0
3924
November 17th, 2011 08:00
How delete dvols manually from celerra storage group?
I recently installed a VNX 5300, when provision the 6 disk NL-SAS for the Celerra assigned a 10 GB LUNs for testing, now I want to delete these LUNs and assign LUNs of different sizes, but does not allow me delete and assign new LUNS to this file system.
I Performed the following steps, but sends me error that is not available on D9 and D10.
1. Create R6 4 +2 RG
2. Create LUNs on two Different SP RG with owner
3. Add Them to Celerra SG with HostID Greater Then 16
4. Go to CS by ssh as nasadmin
5. Issue "nas_diskmark-mark-all" command and wait for a while
6. Check new Celerra dvols Were added to by using "nas_disk-l"
7. Then You Can add manually created dvols to leave it in pool or pool system
How I can delete manually those dvols and asign the new ones?
I appreciate your help.
Perseo_37bdd2
19 Posts
625
0
Posted November 17th, 2011 09:00
exactly.
Perseo_37bdd2
19 Posts
625
0
Posted November 17th, 2011 09:00
Hi, thank you for your answer.
I forgot to include some steps already realized, I ran this command but the message after press enter, was you can delete this disk because has a vol allocation, So I tried to delete the volume, and the message was the volume belongs to a storage group, but the storage goup ~fileserver does not allow me delete anything.
Any other suggestions?
Thank you in advance.
Perseo_37bdd2
19 Posts
625
0
Posted November 17th, 2011 10:00
No, that´s is the case, I believe, because I dont have any file system created.
Perseo_37bdd2
19 Posts
625
0
Posted November 17th, 2011 10:00
no, is listed with "y".
Perseo_37bdd2
19 Posts
466
0
Posted November 17th, 2011 12:00
[nasadmin@vnxfsql ~]$ nas_fs -l
id inuse type acl volume name server
1 n 1 0 10 root_fs_1
2 y 1 0 40 root_fs_common 1,2
3 n 5 0 73 root_fs_ufslog
5 n 5 0 93 root_fs_d3
6 n 5 0 94 root_fs_d4
7 n 5 0 95 root_fs_d5
8 n 5 0 96 root_fs_d6
9 y 1 0 12 root_fs_2 1
13 y 1 0 14 root_fs_3 2
17 n 5 0 110 root_panic_reserve
dynamox
11 Legend
•
20419 Posts
•
87439 Points
625
0
Posted November 17th, 2011 09:00
so you ran the command above and the disk is still listed when you run nas_disk -l