Solved!
Go to SolutionP
pranav_pune
42 Posts
0
1306
January 22nd, 2013 08:00
How to indetify the disk drives catering to a virtual volume created?
I would like to know if there is a way to identify the disk drives which are catering to a storage volume created with mirroring/RAID? I want list all the disk drives associated.
990
0
Posted January 22nd, 2013 09:00
this is what I found after symdev show, Never noticed this out put though, even after runnning the command several times,
RAID-5 Device Information { Number of Tracks in a Stripe : 4 Overall Ready State of RAID-5 Device : Ready Overall WriteProtect State of RAID-5 Device : Enabled Member Number of the Failing Device : None Member Number that Invoked the Spare : None Disk Director (DA) that Owns the Spare : None Copy Direction : N/A RAID-5 Hyper Devices (3+1): { Device : 02A4 { ----------------------------------------------------------------------- Spindle Disk DA Hyper Member Spare Disk DA :IT Vol# Num Cap(MB) Num Status Status Grp# Cap(MB) ----------------------------------------------------------------------- C3D 15A:D3 554 20 342 1 RW N/A 1 140014 C40 16A:C3 131 20 342 2 RW N/A 1 140014 C05 01A:D3 554 20 342 3 RW N/A 1 140014 C08 02A:C3 131 20 342 4 RW N/A 1 140014 } } } 990
0
Posted January 22nd, 2013 09:00
Is that what you were looking for?
990
0
Posted January 22nd, 2013 10:00
Yup. I never noticed this output, though I ran symdev show 100 times, but for other data info. How silly I am...
0
0
Posted December 29th, 2023 15:59
On Windows, open Disk Management (diskmgmt.msc) to view and identify the physical disks linked to the virtual volume.
On Linux, utilize the 'lsblk' command to list block devices and their associations, helping identify disks contributing to the virtual volume.
In VMware, access the vSphere client and navigate to the Storage view to identify the physical datastores corresponding to the virtual volume in your virtualized environment.
(edited)
Quincy561
1281 Posts
990
0
Posted January 22nd, 2013 09:00
symdev show