UNSOLVED
FAST implementation
We are going to implement FAST.
I have doubt regarding adding R2 devices in the FAST. We are planning to implement FAST on Storage group level not in Lun level.
So in case of Storage level we have R1 devices which have MV,SG,IG and PG and related R2 devices .So how to include these R2 device while implementing FAST since it dont have SG,PG,IG and MV for the R2 devices ???
Any idea will be of great help...
Thanks for the reply..
We are implementing FAST in R2 site also.It will be helpfull in case of site failure.
Now for the R2 dv how to include them in FAST of R2 site since these devices are not having any MV in R2 side..these have MV for its corresponding R1 dv only ...
sauravrohilla
859 Posts
338
0
Posted September 8th, 2011 07:00
Just create a SG on the R2 site also and associate it with the fast policy but i still dont see benefit in implementing fast on the r2 site.
sauravrohilla
859 Posts
338
0
Posted September 8th, 2011 12:00
Yes, fast policies need to configured on the r2 site just like you have it on the r1 site.
sauravrohilla
859 Posts
338
0
Posted September 7th, 2011 13:00
For FAST on R2 site, you need to setup fast at the r2 site just like you have implemented it on the r1 but I am just wondering why would you do that? Do you run production from r2/or plan to run in case of a site failure?
regards,
Sauabh