I want to select expansion in my reports on the basis of metrics(name).
Hi all,
Can any one could help me on how to expand selection on the basis of metrics (name) only. i.e. lets suppose I have all together 10000 interface entries but i just want to select expansion on the interface where my metric Availability is less than 100%. Purpose of this is that i want graphs of only interfaces where Availability was less than 100%.
I know thats its a template. Thanks for your sharing. I have this with me. but the problem i face is i have want report which shows all high utilized interfaces it serves me by showing all the links above my threshold level in tabular form but as far as graphs is concern i found only this option that i plot graphs one by pone bu using the interactive table.
What i want is that i want to see the graphs of all the interfaces in single window or each graph for each interface. I hope it will help to answer.
Flo_csI
2 Intern
•
167 Posts
1705
1
Posted January 31st, 2017 01:00
Hi,
The easiest way is to have a table which list your interfaces (usual expansion on part) with their availability.
In Value Setting of the Availability cell put a threshold & select Value Display > Display Minor Severity and Above.
A report template with an example is available here : Interfaces with outage Template.xml
Rgds.