UNSOLVED

CrispyStatic

updated

19 years ago

0

6110

September 10th, 2007 06:00

SanDisk 32gb SSD Slower than Hatachi 60GB 7200rpm SATA??

I wanted to know if anyone else noticed any issues like this. I just got a brand new D630 with the SanDisk 32GB SSD Sata drive. I originally loaded Vista on the laptop, everything was running super fast, but after not being able to find a stable video driver for the nVidia card on vista, I reverted back to Win XP. In my opinion, Vista ran much MUCH faster than XP in all areas. My major problems with XP seemed to be when I was loading windows updates or installing software of any kind. The machine screeched to a halt. when the software was installing and it took a much longer time for the software to install compared to the 7200rpm 60 gb drive i installed with to compare. So has anyone else seen any issues like this when installing software?
  • 607

    0

    Posted September 10th, 2007 19:00

    Just to add a few more things... I did some research and found that the D630 BIOS has the option to enable AHCI, which is designed for the SATA interface. I also read that Vista supports this interface, but after enabling that interface option in the BIOS, I loaded Vista and got the BSOD every time the OS started to load. Anyone else tried to use the AHCI option for Vista and get it to work?
  • wschroter

    2 Posts

    607

    0

    Posted October 3rd, 2007 02:00

    I'm using the sandisk SSD on my dell d420 in Windows XP and it's having the same exact problem - every time I hit the hard drive the machine drops to its knees.
     
    Is there a bios setting that can address this?  Could I just have a bad Solid State Hard drive?
  • 607

    0

    Posted October 3rd, 2007 13:00

    I think I was able to solve my problem. In the BIOS, I changed the SATA mode to "AHCI" instead of "ATA". I also enabled the "Flash Module" option, which is only available after selecting "AHCI" mode in the SATA section. I then downloaded the AHCI drivers from Intel... http://downloadcenter.intel.com/detail_desc.aspx?strstate=live&productid=954&dwnldid=13675&agr=y〈=eng&prdmap=954 I copied the correct drivers to a flash drive and then I installed Vista, and at the install, you have to tell it you have drivers to install for the hard drive controller. Use the flash drive and drill down to the correct driver and it should be good from there. I am experiencing so much better speed and response now since I am using the AHCI interface. ***Keep in mind, you cannot simply change the mode to AHCI and make it work. You have to reinstall the OS so it will load the correct drivers for the hard drive controller. let me know if you need any more clarification, Jeff
  • migish

    2 Posts

    607

    0

    Posted November 6th, 2007 16:00

    Has anyone tried installing Linux on a Sandisk SSD? Will I need to find and install a driver?
  • 607

    0

    Posted November 9th, 2007 18:00

    It *is* the SSD. I have it too, I tested it, extremely fast on read, but about 3 times slower on *write* than the same laptop with a regular 120 GB drive. That means: *slow*. Oh wait, that was not advertised by Dell or the hard drive manufacturer? How convenient... Very disappointing option.
  • JHoulihan

    2 Posts

    607

    0

    Posted January 29th, 2008 12:00

    Same problems here with the Sandisk SSD.  The drive is a dud.  Stay far away from Sandisk products.  You pay a significant premium for the drive and it is advertised as being very fast yet it is slower than any drive that I've used in the last 10 years.
     
    Run away from Sandisk SSD's.
     
    I'm also VERY disappointed in DELL for not acknowledging the problem.