I installed a second HDD (Samsung SV6004H), using the CS jumper config., into the open Primary IDE channel slot. I figured out how to initialize, partition, and format the drive and turn on the Primary IDE port in BIOS so that the drive is recognized. The drive displays as "Healthy" in Disk Management but does not show up in "My Computer" or "Windows Explorer." How do I get access to this drive to utilize the extra storage I thought I was getting?
Or can I only use this new HDD as an alternate OS and Bootdrive? Would I need a second SATA HDD to utilize "extra" storage?
Message Edited by darterdave on 10-07-2006 09:27 PM
Good job providing the details (seems to be a rare skill anymore). I'll assume you used disk management to partition and format. If you go there, it should report a drive letter for that volume. Do you see one?
To answer you second question, if you combine SATA and IDE drives, only the SATA drive can serve as a system drive.
Thanks for the input. I didn't respond earlier because I had already found the answer to my own question after a lot of time looking around my computer and scratching my head. The answer was simple as it turned out... open TweakUI and check the drive letter. I can't believe that in all the threads I read, not one ever mentioned TweakUI. Well, now I know. Maybe this thread will help out somebody else in the future (and save them a great deal of time).
osprey4
6 Operator
•
34230 Posts
157
0
Posted October 8th, 2006 10:00
Good job providing the details (seems to be a rare skill anymore). I'll assume you used disk management to partition and format. If you go there, it should report a drive letter for that volume. Do you see one?
To answer you second question, if you combine SATA and IDE drives, only the SATA drive can serve as a system drive.