UNSOLVED

szekelyk

updated

14 years ago

S

szekelyk

2 Intern

•

129 Posts

0

1440

July 26th, 2012 06:00

EmailXtract skip mailbox during archiving

Running an archiving job using the EmaiXtract, one mailbox is skipped. It is not even in the log, and no message is archived from it. Nothing special with the mailbox, there are many similar on the system without any problem. It is somehow not recognized. It is used as a departmental mailbox, eg. office@corp.com.

It is an Exchange environment and EX 4.81.

It there anything to do is such case?

Regards, Krisztian

  • szekelyk

    2 Intern

    •

    129 Posts

    448

    0

    Posted July 26th, 2012 07:00

    Yes, it opens.

    Krisztian

  • szekelyk

    2 Intern

    •

    129 Posts

    448

    0

    Posted July 26th, 2012 07:00

    Gary,

    I will try it.

    Thanks.

    Krisztian

  • Gary_Reardon

    2 Intern

    •

    272 Posts

    450

    0

    Posted July 26th, 2012 07:00

    Can you open the mailbox in Outlook from the EX Console logged in as the Service Account?

  • Gary_Reardon

    2 Intern

    •

    272 Posts

    448

    0

    Posted July 26th, 2012 08:00

    Try a specific task against this mailbox and see what happens

  • szekelyk

    2 Intern

    •

    129 Posts

    448

    0

    Posted July 27th, 2012 01:00

    Tried it, it is skipped. There are more similar named mailboxes.

    The names are the following.

    corp country department (this is the mailbox)

    corp country department director

    corp country department office

    corp country deparment 2ndoffice

    The mailboxes names are similar and relatively long, can this cause the problem?

    Some mailboxes are stated as (NonUser Mailbox), but not the problematic one.

  • szekelyk

    2 Intern

    •

    129 Posts

    448

    0

    Posted July 27th, 2012 02:00

    The mailbox is disabled, because it is shared among more user, and visible in the GAL.

  • Gary_Reardon

    2 Intern

    •

    272 Posts

    448

    0

    Posted July 27th, 2012 08:00

    Sounds like you will need to open a Support Request for this one