I have a small network with 8 computers all running on Win xp and using a dell 1600n laser all-in-one for printing. I recently added a new dell computer with a Win XP 64 bit edition to the network. I am unable to get the printer set up either for the computer or in the network. Does anyone have a suggestion. I have the most recent driver and software installed. All OS are up to date. All other computers printing smoothly. It appears that dell does not have a win64 driver yet. How can I get it to print using the network. Thanks for your help!
You won't be able to print using the dell drivers until/if they come out with 64-bit drivers for the printer. Now, if I remember correctly, the 1600n has postscript capabilities. You may want to try finding a generic 64-bit postcript driver and point it to the printer.
Digging up a dated thread here, but I am in the same situation as
romorza. Has any headway been made on a 64-bit driver for the 1600n driver? Are there any plans to? And/or does anyone know of a sufficient generic driver?
Message Edited by NoAffinity on 01-22-200712:25 PM
I did some research and found that the dell printer is similar to the Samasung. I downloaded the samsung 64 bit driver and was able to get my 1600n to work with it without a problem so far. I don't recall which model i used but I recalled that I went to Samsung's download area for their laser printers. Good luck!
WalksWithWolf
50 Posts
163
0
Posted August 23rd, 2006 04:00