Solved!
Go to SolutionDell Universal Receiver not showing up in Dell Universal Receiver Control Panel app
I am trying to pair a keyboard and mouse to a Dell Universal Receiver.
I can see that Dell Universal Receiver from my laptop but it is not showing up in the "Dell Universal Receiver Control Panel" app.
Tried removing the physical receiver and plugging it into another USB port directly or indirectly, also tried uninstalling the receiver drivers and scan for hardware changes in Device Manager, still got the same result of system able to identify the receiver but still not showing in "Dell Universal Receiver Control Panel" app.
Does anyone have any idea how to get it to show up?
0
0
Posted April 16th, 2024 17:27
The app is looking for a Logitech Unifying receiver ??
0
0
Posted November 14th, 2024 16:07
@mjhhoops33 I downloaded the Logitech Unifying receiver software and it did not recognize the Dell receiver.
0
0
Posted November 14th, 2024 16:09
I have tried 2 different receivers but the software does not work I and running Windows 11 version 23H2 22631.4317
0
0
Posted November 23rd, 2024 00:46
The Dell Accepted Solution is not a solution. It does not state how keyboard and mouse were paired.
0
0
Posted December 9th, 2024 17:04
As stated above by Brad......This is not a solution. Does not work at all for what we need to do. Dell sold us hunderds of wireless keyboards and mice since the covid shutdown and when they get turned back in it is impossible to keep everything together so reprogramming/re-paring is a must. I have so many sets that are worthless because we need to get these things communicating again and the Universal Receiver control panel doesn't identify any of them. How about someone from Dell provide a real solution. I do not have this problem with Logitech reprogramming.
0
0
Posted December 11th, 2024 00:44
It looks like the Dell solution was edited after I made my comment that it wasn't a solution.
It shouldn't be such a complex to pair wireless keyboard and mouse.
0
2
Posted December 11th, 2024 04:43
For those who are unfamiliar to Dell Peripheral Manager application, it's user interface application, supports the following:
• Pair/unpair devices through RF dongle or Bluetooth.
• Assign shortcuts to customizable action buttons.
• View advanced device information, such as firmware version and
battery status.
• Configure webcam and use its features.
• Upgrade software and device(s) using latest updates.Here is an example of on-screen instructions for pairing new device using both RF and Bluetooth options.
0
0
Posted November 4th, 2025 13:48
I had a similar problem with USB Dell RF receiver, model: SD-8160:
Dell Universal Receiver - does not recognise it.
Dell Display and Peripheral Manager 2.1.2.12, aka DDPM -only recognise dongles paired with a mouse/keyboard. They can unpair but cannot pair again, making the device unusable...
Dell Peripheral Manager 1.7.5 aka DPM -can recognise unpaired dongle and PAIR it again. This tool is replaced by DDPM with can do less than older DPM (cannot pair), be careful when using DDPM.
0
0
Posted November 25th, 2025 15:20
@DELL-Nat M This solution does not work. Attempting to run the firmware update just gives me the error message of "Enumeration fail!". How has this issue been around for over 2 years and not been addressed?
DELL-Nat M
Community Manager
•
3803 Posts
•
21448 Points
0
0
Posted November 22nd, 2024 14:47
Hi everyone,
What caused the issue?
The latest firmware update was not available to the servers globally. This is causing a download failure for you. The dongle firmware can end up in its bootloader state when the firmware update does not complete successfully. The dongle loses communication with the keyboard and mouse.
How to resolve?
Manually download and install the following firmware:
Download this .zip file: Standalone Bootloader FW Update Utility
Extract the .zip file to a temporary folder.
Open the temporary folder and right-click
Dongle_FWUpdateTool 0.1.2.6.exeand select Run as Administrator.Follow the on-screen instructions to complete the firmware update.
Launch the Dell Peripheral Manager application.
Run the Firmware update process in DPM.
Go back to Step.1 and repeat them if the dongle is still having issues.
Contact us by clicking on the 'Get Help Now' chat feature located in the bottom-right corner of the page.
(edited)
#IWork4Dell