
UNSOLVED
Poor performance on Hardware RAID 745n - high interrupts/sec
I have posted on here several times about the extremely poor performance we get out of our 745n which is a hardware raid SATA unit. We squeezed a bit more performance out of it by changing the RAID5 data partition to RAID10 but sometimes we still find the machine very unresponsive (even though the CPU < 100%)
I've continued to investigate this and have noted that using performance monitor the machine ticks over at around 1000 interrupts/sec - that is with absolutely no load - no network connection!). I have checked with two other 745n's and they do the same thing.
When the machine gets stressed for example by copying a DVD ISO file on to the RAID set over gigabit network the interrupts/sec get close to 3000.
I also have ATA/SATA PE650 & PE750 and these don't do it, and needless to say my SCSI machines are fine.
The 745n's are running varying firmware versions but the one I primarily test with is running 7414. I note from Adaptec's site that this is now very old but can't figure out a safe way of using the Adaptec firmware on the Dell card.
Can anyone who knows more about low-level windows suggest a way of determining whether this is a RAID driver issue or the actual card? If it's the driver I may try and hack the Adaptec driver as it is much newer. Alternatively I will investigate how I could change the RAID controller and somehow still get the NAS image on it.
Responses (0)
Solutions (0)
