UNSOLVED
MD3000i two failed disk
Good morning, I have an old MD3000i connected to a little proxmox server.
During a storm two old one terabyte disk went offline as failed.
As backup was old, I tried to do a recovery using an other SAS controller in readonly way to examine the trouble on one disk.
Problem was defined by no more spare sectors on relocatable table.
I decided to make a surface clone of the disk using ddrescue that recovery all data on the new disk.
Then I put back the disk in the same position of the failed one and examined the situation.
The new disk is ok but it is in unassigned state.
There is any possibility to say to the controller "DISK 6 in the group X" without destroing data?
Thank you in advance
DELL-Marco B
Moderator
•
3980 Posts
0
0
Posted May 24th, 2024 16:46
Hello,
I can suggest to call technical support in this case because the situation is critical and not sure that a revive should be the right command. We need to analyse logs, and make a clear statement of the situation.
Thanks
DELL- Marco B
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!
D.Bassani
1 Rookie
•
2 Posts
•
2 Points
0
0
Posted May 24th, 2024 13:10
May be the solution command:
Smcli -n arrayname -c "revive DiskGroup [\"GroupName"\];"
?
Thankyou