I've tried to set up a Dell ME4024 storage array with a KVM/Qemu hypervisor (PowerEdge R6515). I first tried with Proxmox, then with plain Qemu, different versions, same issue. The array is configured with Virtual disks and ADAPT RAID. It is connected to the server with SAS HBAs.
I followed the guidelines of the "Dell ME4 and Linux" document and created one LVM Volume Group on top of a LUN.
I create a VM on the server with local storage and add a virtual SCSI drive on the array with Discard = unmap support for thin provisionning support.
Inside the VM, I copy some files to the virtual disk, delete them, I can see that the thin provisionning works because the allocated space decreases. Then I copy the files again, and the virtual drive gets corrupted, "bad bitmap checksum" errors on Ubuntu VMs, and chkdsk errors on Windows VMs.
Do you have any issues with corruption if you don’t make a thin provisioned lun? Are you using xfs or ext4? Let us know if you have any other questions.
Yes I create the LVM with —dataalignment=1M. With the Linux VMs I use ext4. The volume doesn't seem to have corruption when I don’t use the discard/unmap option, but the performance becomes much worse. I don’t know if I can create a LUN which is not thin provisioned from the ME4 interface when I use virtual storage.
Yes, the device is very recent and under warranty, I called Dell Support here in France, they told me that it looks like a configuration issue, that if I want help, I must subscribe to Dell ProDeploy, and they recommended to look at the official documentation. It wasn't very helpful because I already read it... It is strange to get corruption with rather standard settings.
I would be grateful if there is something you can do about it.
DELL-Josh Cr
Community Manager
•
9801 Posts
•
45350 Points
1614
0
Posted April 30th, 2021 12:00
Hi,
Did you do physical volume data alignment? page 26 https://dell.to/3345nFy
Do you have any issues with corruption if you don’t make a thin provisioned lun? Are you using xfs or ext4? Let us know if you have any other questions.