Unable to complete deployement on vSphere 5.5 - SSH_CANNOT_INSTALL_PACKAGE
When using the deployment wizard to install ScaleIO on a 5-node vSphere 5.5 lab environment, I keep running into failures when it starts deploying modules for LIA, PRIMARY_LDM, SECONDARY_LDM, etc. The failures are 'SSH_CANNOT_INSTALL_PACKAGE'.
I have verified that I can ssh into all of the VMs that are created during the installation wizard execution from both my desktop as well as the vCenter server itself.
Any further ideas on what could be causing this to fail?
Here's a snippet from the log:
Jan 12, 2016 4:15:23 PM Host: xxx.yyy.32.106 - STARTED: Deploy SVM [Mgmt IP: xxx.yyy.32.166, data IP 1: aaa.bbb.16.101, data IP 2: null, VM id: null, mgmt subnet mask: 255.255.254.0, data subnet mask 1: 255.255.255.0, data subnet mask 2: null, default gateway: xxx.yyy.32.1, datastore: filerstore-01, memory size: 1780]
Jan 12, 2016 4:33:11 PM Host: xxx.yyy.32.107 - STARTED: Deploy SVM [Mgmt IP: xxx.yyy.32.167, data IP 1: aaa.bbb.16.102, data IP 2: null, VM id: null, mgmt subnet mask: 255.255.254.0, data subnet mask 1: 255.255.255.0, data subnet mask 2: null, default gateway: xxx.yyy.32.1, datastore: filerstore-01, memory size: 1780]
Jan 12, 2016 4:34:28 PM Host: xxx.yyy.32.106 - SUCCEEDED: Deploy SVM [Mgmt IP: xxx.yyy.32.166, data IP 1: aaa.bbb.16.101, data IP 2: null, VM id: vm-69, mgmt subnet mask: 255.255.254.0, data subnet mask 1: 255.255.255.0, data subnet mask 2: null, default gateway: xxx.yyy.32.1, datastore: filerstore-01, memory size: 1780]
Yes, I can SSH into the 3 VMs created at this point, ScaleIO-xxx.yyy.32.166, ScaleIO-xxx.yyy.32.167, ScaleIO-xxx.yyy.168 from both my desktop and the vCenter server. I am using the root/ credentials set when I went through the wizard. I cannot disclose my password here, but it's 8 chars in the a-z,0-9 set. I am using the SVM Template that was created for me "EMC ScaleIO SVM Template (v1.32.3455) 1".
1. Not that the character set your password falls within is problematic, but I'd reattempt with a super plain lowercase-a-z-only password, just to be sure there's no issue there.
Using the implementation wizard to install SIO, during step 3 "create the new system", a password is requested for the admin user. It states on the screen, and in the user guide, that the following is required.
Password must meet the following criteria:
Between 6 and 31 characters
Include at least 3 of the following groups: [a-z], [A-Z], [0-9], special chars (!@#$....)
No white spaces
This is followed but the password is not accepted when some combinations are used.
There's no real error message, but in the screenshot you can see that the password box is highlighted in red when entering an invalid combination.
The issue was recreated in the lab, using a few various password combinations as follows
Test!1 - accepted
Test#1 - accepted
Test@1 - accepted
Test?1 - Not accepted
Test$1 - Not accepted
possible workaround would be in meantime:
Please use a different password when deploying the system and change it after the deployment is done using "scli --set_password" command.
Serhad Ali Turhan
1 Rookie
•
7 Posts
507
0
Posted January 13th, 2016 13:00
Hi,
I've the same problem.