Hi Blake,

Is there any more info under "Show log" button? It should tell you in more details which step exactly failed.

Cheers,

Pawel

Unfortunately the logs in the virtual center wizzard are lacking. Ideally it would give out some details of service port and IPs involved in the communication. Here are some additional logs but they seem to just list more errors related to the initial one I posted.

node 1
Completed: Deploy VM ScaleIO-10.0.0.42
Completed: Deploy VM ScaleIO-10.0.0.41-GW
Completed: Perform initial configuration for VM: 10.0.0.42
Completed: Perform initial configuration for VM: 10.0.0.41
Completed: Install ScaleIO LIA module
Completed: Install ScaleIO MASTER_MDM module
Completed: Add MASTER_MDM to MDM cluster
Completed: Install ScaleIO SDS module
Completed: Install ScaleIO RFCACHE module
Completed: Install ScaleIO INSTALLATION_MANAGER module
Failed: Configure SDC driver on ESX (The SDC cannot communicate with the MDM cluster. Verify vmkernel and/or portgroup settings. )
Completed: Create RDM ScaleIO-RDM-737434904 on datastore esxi-001-boot
Completed: Create RDM ScaleIO-RDM-737434905 on datastore esxi-001-boot
Completed: Create RDM ScaleIO-RDM-737434906 on datastore esxi-001-boot
Completed: Add SDS device ScaleIO-2bf45d18 to Storage Pool Spool
Completed: Add SDS device ScaleIO-2bf45d19 to Storage Pool Spool
Completed: Add SDS device ScaleIO-2bf45d1a to Storage Pool Spool


node 2
Completed: Deploy VM ScaleIO-10.0.0.43
Completed: Perform initial configuration for VM: 10.0.0.43
Completed: Install ScaleIO LIA module
Completed: Add SLAVE_MDM to MDM cluster
Completed: Install ScaleIO SDS module
Completed: Install ScaleIO RFCACHE module
Failed: Configure SDC driver on ESX (The SDC cannot communicate with the MDM cluster. Verify vmkernel and/or portgroup settings. )
Completed: Create RDM ScaleIO-RDM-737434907 on datastore esxi-002-boot
Completed: Create RDM ScaleIO-RDM-737434908 on datastore esxi-002-boot
Completed: Create RDM ScaleIO-RDM-737434909 on datastore esxi-002-boot
Completed: Add SDS device ScaleIO-2bf45d1b to Storage Pool Spool
Completed: Add SDS device ScaleIO-2bf45d1c to Storage Pool Spool
Completed: Add SDS device ScaleIO-2bf45d1d to Storage Pool Spool


node 3
Completed: Deploy VM ScaleIO-10.0.0.44
Completed: Perform initial configuration for VM: 10.0.0.44
Completed: Install ScaleIO LIA module
Completed: Add TB to MDM cluster
Completed: Install ScaleIO SDS module
Completed: Install ScaleIO RFCACHE module
Failed: Configure SDC driver on ESX (The SDC cannot communicate with the MDM cluster. Verify vmkernel and/or portgroup settings. )
Completed: Create RDM ScaleIO-RDM-737434901 on datastore esxi-003-boot
Completed: Create RDM ScaleIO-RDM-737434902 on datastore esxi-003-boot
Completed: Create RDM ScaleIO-RDM-737434903 on datastore esxi-003-boot
Completed: Add SDS device ScaleIO-2bf45d15 to Storage Pool Spool
Completed: Add SDS device ScaleIO-2bf45d16 to Storage Pool Spool
Completed: Add SDS device ScaleIO-2bf45d17 to Storage Pool Spool

Hi Blake,

I am wondering if you are not experiencing the problem described under SCI-12873 in the ScaleIO Release Notes... it isn't a 5 node cluster from what I see, but I guess it's still worth a shot - can you simply please try to click on Continue Deployment and see if that helps?

Thanks!

Pawel

Clicking continue just results in the exact same errors. Really just looking for some insight into exactly what the script is doing at the point of the error? 

Hi,

Did you check the Virgo logs on the vSphere Web Client? There should be some more details.

Pawel

I have reviewed these logs. Seeing an sso issue on vcenter and just more generic failures from the SDC configuration tasks. Will look at some solutions from VMware on sso issue but I suspect that is separate from the failures at this point.

Logs--> scaleIO logs · GitHub

Hice one, thank you for sharing!