UNSOLVED

Goki77

updated

3 months ago

G

Goki77

4 Posts

0

8670

August 5th, 2013 02:00

MS Server 2003 SE SP2

Hello,

our old DELL PowerEdge 2850 is slowly giving up under pressure.

So, we got the R210 II as a replacement.

My question is, can I install Windows Server 2003 Standard Edition Service Pack 2, on the new R210 II, in order to just place the image I have of the PowerEdge 2850 that I have, with all applications?!?

Or do I need to install windows 2008, and install every application manually?!?

Thanks in advance for all the replies...

  • theflash1932

    11 Legend

    •

    16255 Posts

    536

    0

    Posted August 5th, 2013 06:00

    Server 2003 is not supported on the R210 II by Dell, and I don't believe the chipset is compatible at all.  Seems like others have tried unsuccessfully to install it.  Your [best] alternative to installing a modern OS and setting it up manually is to virtualize your 2850/2003 server to run on the R210 II.

  • Goki77

    4 Posts

    536

    0

    Posted August 6th, 2013 07:00

    Thanks for the answer...

    Now, I have another problem. I've installed Win 2008, and it's ok - but I can't make an image backup with the SSR 2011.

    The Symantec CD does not see the RAID!!

    Any idea what the problem is?!?

  • Dev Mgr

    6 Operator

    •

    9308 Posts

    •

    3 Points

    536

    0

    Posted August 6th, 2013 08:00

    The Symantec CD probably doesn't include the driver for the raid controller on your 2850 and therefor doesn't see any storage.

    Are you wanting to run the 2003 OS as a virtual machine on your Windows 2008? If so, did you enable hyper-v or are you wanting to use VMware Virtual Server, VMware Workstation, or some other virtualization software solution?

    The answer to this may provide alternate options to move your data/image (e.g. VMware P2V converter).

  • Goki77

    4 Posts

    536

    0

    Posted August 6th, 2013 12:00

    I just wanted to use the Symantec 2011 CD to backup the server with the 2008 installed.

    I also thought it was lacking the driver for the RAID controller, but when I try and use the driver that worked for the installation of Windows Server 2008, the SSR CD tells me that it is a 64bit driver (and on the DELL site it clearly said it was a x86 driver).

     

    Any ideas what to try next?!?

     

    This is my first step, in order to get things moving for the transfer of the programs and applications...

  • Hamboney

    79 Posts

    536

    0

    Posted August 7th, 2013 09:00

    The driver you need will be based on the WinPE OS used in the Symantec 2011 CD.  I would not expect it to be a 64 bit OS.  Try to determine the version of the OS on the CD and download the appropriate driver for it ( possibly Win2003/XP x86 ?).

    Looking at the installed Win2008 OS you can determine the DEV_xxxx and VEN_xxxx numbers for the device from the propertities and using the OS info above download the correct driver.  I forgot to look, is the installed OS Win2008 x86 / Win2008 x64 / or Win2008 R2 ?  Also, in the past we have seen problems with some Intel .INF driver files that incorrectly identify the target architecture of the driver but i wouldn't suspect that first off...

    From there you can use the MS DISM to inject the driver into the .wim of a copy of the CD or point to it on every reboot with the exisiting CD.