
UNSOLVED
RAID 5 Dis-Array
Hello,
We recently had a raid configuration mishap.
Someone removed the 4 drives without noting the order from a Dell 6600.
Is it possible to recover from this error by either simply replacing the drives in any order or by using some method to discover the drives order?
Any help would be greatly appreciated.
Thanks
Christopher
Responses (3)
Solutions (0)

Dev Mgr
6 Operator
•
9308 Posts
•
3 Points
187
0
Posted April 7th, 2008 15:00
What I would do is this:
- keep the drives out (or pull them out again if you already inserted them)
- power up the server
- go into the PERC bios
- clear the config from the raid controller (the drives have this config as well)
- save and exit
- power down the server
- insert the drives
- if the PERC comes up about different configurations between the disk and the raid controller, select to use the config of the disks
- let the server boot up
This is obviously at your own risk, but this is the easiest to try and has a good chance of working if nobody cleared the config on the PERC when the drives were still in the system.