UNSOLVED

Slimydoom

updated

8 months ago

S

Slimydoom

2 Intern

•

10 Posts

0

7626

February 7th, 2020 07:00

Optiplex 9020 MT RAM compatibility

Hi guys I want to buy 8gb ram but I am not sure if it´s compatible with my setup. I have Optiplex 9020 MT.

I want to buy this one exactly - HMT41GU6MFR8C-PB NO AA ( https://www.skhynix.com/eolproducts.view.do?pronm=DDR3+SDRAM&srnm=HMT41GU6MFR8C&rk=20&rc=module)

Image - https://imgur.com/a/ONdzw6C

 

Right now I have 2x 2gb rams - HMT325U6EFR8C-PB NO AA (https://www.skhynix.com/eolproducts.view.do?pronm=DDR3+SDRAM&srnm=HMT325U6EFR8C&rk=20&rc=module)

Image -  https://imgur.com/a/EqVEi1Y

And also 1x 4gb - HMT351U6CFR8C-PB NO AA  (https://www.skhynix.com/eolproducts.view.do?pronm=DDR3+SDRAM&srnm=HMT351U6CFR8C&rk=20&rc=module)

Image - https://imgur.com/a/hhtFTwy

  • Slimydoom

    2 Intern

    •

    10 Posts

    4284

    0

    Posted February 7th, 2020 11:00

    e. remove

  • JOcean

    11 Legend

    •

    12621 Posts

    •

    69453 Points

    4287

    0

    Posted February 7th, 2020 11:00

    I assume you are thinking about leaving the RAM you have installed now in place and adding an 8GB RAM module. That is a lot of different types of RAM. It is always recommended to add RAM in pairs or 4 at a time in matched kits. That way you have the most compatible RAM installed. Crucial RAM is one of the most Dell compatible RAM types. The Hynix RAM is good RAM, I just would not recommend mixing 2 x 2 and 1 x 4 and 1 x 8.

    The Crucial RAM page for your system is here.

    I am not a Dell employee...I am forum volunteer

    Serious work on an E5430 and constantly building and working on an i5-6500 Desktop

  • speedstep

    11 Legend

    •

    46969 Posts

    4268

    0

    Posted February 7th, 2020 15:00

    1.5v ram is not supported.

    1.35v ram is required.

    Specs: DDR3 PC3-12800 • CL=11 • Unbuffered • NON-ECC • DDR3-1600 • 1.35V • 1024Meg x 64 •

    https://www.crucial.com/usa/en/optiplex-9020-(mini-tower)/CT4506041

     

  • Slimydoom

    2 Intern

    •

    10 Posts

    4254

    1

    Posted February 7th, 2020 23:00

    It can´t be true , because as you saw , all of my RAMs are 1.5V.

    It even came with 1.5V Ram when I bought it.

    Even there says 1.5V : https://ark.intel.com/content/www/us/en/ark/products/75043/intel-core-i5-4570-processor-6m-cache-up-to-3-60-ghz.html

  • speedstep

    11 Legend

    •

    46969 Posts

    4225

    0

    Posted February 8th, 2020 08:00

    "HMT41GU6MFR8C-PB" is not listed as compatible nor is it listed as DUAL Voltage.

    https://www.crucial.com/usa/en/what-is-dual-voltage-memory

    LOW DENSITY ram is required.

    The ram that works is VERY specific.

    Kingston Value Ram and Random Hynix models are not likely to work.

    MUST NOT BE HIGH DENSITY RAM.

    https://www.dell.com/en-us/shop/dell-memory-upgrade-8gb-2rx8-ddr3-udimm-1600mhz/apd/a6994446/memory

    • Manufacturer part SNP66GKYC/8G
    • Dell part A6994446

    Specs: DDR3 PC3-12800 • CL=11 • Unbuffered • NON-ECC • DDR3-1600 • 1.35V • 1024Meg x 64 •

    Manufacturer Hynix
    Manufacturer Part # HMT41GU6MFR8C-PB
    Memory Type DDR3 SDRAM
    Capacity 8GB
    Data Transfer Rate 1600Mhz
    Pins 240 Pin
    Bus Type PC-12800
    Error Correction Non-ECC
    Cycle Time 1.25ns
    Cas CL11
    Memory Clock 200Mhz
    Rank Rank 2
    Voltage 1.5
  • Slimydoom

    2 Intern

    •

    10 Posts

    4229

    0

    Posted February 8th, 2020 08:00

    So if I will remove my RAM and place 2 of these 8 GB which I mentioned , will it work?

  • Slimydoom

    2 Intern

    •

    10 Posts

    4218

    0

    Posted February 8th, 2020 09:00

    I understand , but the 8GB "HMT41GU6MFR8C-PB" has same Voltage as the others RAM which I have and they are working.

    Even the https://www.dell.com/en-us/shop/dell-memory-upgrade-8gb-2rx8-ddr3-udimm-1600mhz/apd/a6994446/memory which you sent me has 1.5 Voltage1.5V.jpg

  • speedstep

    11 Legend

    •

    46969 Posts

    4183

    0

    Posted February 8th, 2020 18:00

    1.35v - 1.5v Dual-Voltage DDR3 Memory works.

    The spec for that ram is 1.5v only

    It may work but its not listed as working.

    Mixing Ranks and CAS and vendors is not supported.

    High Density ram is not supported.

    The working ram is VERY specfic.

  • donm4599x

    2 Intern

    •

    478 Posts

    4179

    0

    Posted February 8th, 2020 19:00

    Sounds like almost nothing will work

    @speedstep 

    I'll ask again. How does one know if memory is "high density"? It doesn't seem to be mentioned in any memory specs or online listing. All I ever see are tags like 2rX8 etc.

    You often talk about high density ram, and I've asked you this before, but I guess you missed it. Sure would be nice to know how to identify it.

    Can you at least give some examples?

     

     

     

  • speedstep

    11 Legend

    •

    46969 Posts

    2013

    0

    Posted February 8th, 2020 22:00

    The original question is does the ram work.

    The answer is it might not.

    Ram Density and other parameters are not dell issues.

     High or low density?

    You should always purchase only memory your system supports. In this case,only low density is compatible with your system.