UNSOLVED
WPA connection loses packets - please help!
Hi All!
I have a problem with the wireless segment of my network, which consists of a Linksys BEFW11S4 V4 (firmware 1.50.10) wireless router, and a Intel Pro Wireless 2100 3A card (driver ver. 1.2.0.56) in a centrino combo.
My problem is that when i connect using WPA-PSK, the connection loses packets every few seconds.
I use the dell-installed intel PROset utility (v. 7.1.1), and i have stopped the WZC service form running (since this caused me getting booted of the network every 5 mins:).
When i continuously ping the router, around 6-8% of the packages gets no reply (every 5. - 15. package). All the others return fine.
This problem occurs no matter if I'm 3 feet away, or 30 feet through big walls.
The connection works flawlessly with any kind of WEP encryption, and likewise without any security.
What am I missing here?
Please help me, because this i driving me mad
Sincerely, and thanks in advance...
Beack
Here's a snip from the windows ping utility:
Anmodning fik timeout.
Svar fra 192.168.1.1: byte=32 tid=11ms TTL=150
Svar fra 192.168.1.1: byte=32 tid=4ms TTL=150
Svar fra 192.168.1.1: byte=32 tid=7ms TTL=150
Svar fra 192.168.1.1: byte=32 tid=7ms TTL=150
Svar fra 192.168.1.1: byte=32 tid=6ms TTL=150
Svar fra 192.168.1.1: byte=32 tid=6ms TTL=150
Svar fra 192.168.1.1: byte=32 tid=6ms TTL=150
Svar fra 192.168.1.1: byte=32 tid=7ms TTL=150
Anmodning fik timeout.
Svar fra 192.168.1.1: byte=32 tid=11ms TTL=150
Svar fra 192.168.1.1: byte=32 tid=7ms TTL=150
Svar fra 192.168.1.1: byte=32 tid=6ms TTL=150
Svar fra 192.168.1.1: byte=32 tid=7ms TTL=150
Svar fra 192.168.1.1: byte=32 tid=8ms TTL=150
Svar fra 192.168.1.1: byte=32 tid=8ms TTL=150
Svar fra 192.168.1.1: byte=32 tid=3ms TTL=150
Svar fra 192.168.1.1: byte=32 tid=7ms TTL=150
Svar fra 192.168.1.1: byte=32 tid=8ms TTL=150
Anmodning fik timeout.
Svar fra 192.168.1.1: byte=32 tid=11ms TTL=150
Svar fra 192.168.1.1: byte=32 tid=4ms TTL=150
Svar fra 192.168.1.1: byte=32 tid=7ms TTL=150
Svar fra 192.168.1.1: byte=32 tid=7ms TTL=150
Svar fra 192.168.1.1: byte=32 tid=7ms TTL=150
Svar fra 192.168.1.1: byte=32 tid=7ms TTL=150
Svar fra 192.168.1.1: byte=32 tid=6ms TTL=150
Svar fra 192.168.1.1: byte=32 tid=7ms TTL=150
Anmodning fik timeout.
426
0
Posted February 8th, 2004 19:00
This is a shot in the dark....but do you have any Cordless Telephones? If so are any of them 2.4Ghz phones?
if the answer to both questions is "yes" then you have to change the channel for your wireless signal (Linksys website has instructions). Linksys recommends Channels 1, 6, and 11 as the most likely to have the least amount of interference.
oh....what are the specs for your system?
426
0
Posted February 21st, 2004 19:00
I'm having a somewhat related problem -- I have a linksys BEFW11S4 v4 router (which is centrino verified) with the latest firmware (1.50.10) and an inspiron 8600 w/ centrino. I downloaded the latest drivers from the dell site (including one that just came out last night). I was having dropped connections under WEP security, but the drivers fixed that. However, I still cannot use WPA security -- the option shows up in the wireless config, but once I restart the laptop it will have an 'excellent' connection, but will never get assigned an IP address. Intel ProSet shows "Associated not Authenticated with (my network's SSID)". Suggestions? Oh yeah, I'm still using the Windows Network Configuration, not Intel ProSet. Will that change anything?426
0
Posted February 23rd, 2004 01:00
I figured out that my WEP problems stopped because of my disabling 802.1x authentication, not because of the new drivers. My WPA problems remain, however. Has anyone figured out how to get WPA working w/ centrino? Has anyone even gotten WPA-PSK + TKIP to work at all?426
0
Posted February 29th, 2004 23:00
Sucess! I solved the problem with my BEFW11S4v4 router by downgrading the firmware back to 1.50. Ironically, Linksys support's first suggestion had been to upgrade to 1.50.10 (which I did immediately after setting up the router). Now WPA seems to be functional (it has been working for a few hours and many restarts). Apparently version 1.50.10, in fixing other issues, destroyed the BEFW11SFv4's WPA capability.
Beack
12 Posts
426
0
Posted February 8th, 2004 19:00
Hi modena328 !
No, I don't have any other 2.4 GHz items in my home.
I have tried different channels, and it is no different.
Also the fact that WEP encryption works flawlessly would make me believe that it is not the kind of interference problem you suggest.
The specs of my system is found as my signature below.
btw, the text i have taken from the ping utility is in danish, but i think you get the idea
Beack