UNSOLVED

Govtankguy

updated

23 years ago

0

20899

November 30th, 2002 00:00

TrueMobile 1150 compatibility with Cisco LEAP

Has anyone been able to get an Internal TrueMobile 1150 to communicate with a Cisco 350 access point using Cisco's LEAP software.  I heard rumors that the internal 1150 was made by Cisco for Dell but Cisco's software doesn't recognize it.  Is there any other software that works with the TrueMobile 1150 and Cisco's Leap?

Thanks in advance.

  • pas4227

    2 Posts

    322

    0

    Posted November 30th, 2002 13:00

    If you are running Windows 2000, see this thread and it may take care of your problem:

    http://forums.us.dell.com/supportforums/board/message?board.id=latit_network&message.id=162

  • 322

    0

    Posted December 4th, 2002 10:00

    I'm using Win XP.  I can connect to Wireless networks, I just can't use the Cisco software.  I doesn't recognize the TrueMobile 1150 internal card.
  • dlabafr

    1 Message

    322

    0

    Posted June 3rd, 2003 13:00

    Well, DELL!

    What's your answer??

    Is it possible to authenticate using LEAP when using TrueMobile?

    Or do we have to buy Cisco Aeronet 350-pccards??

    /Anders

  • DELL-BobT

    3125 Posts

    322

    0

    Posted June 9th, 2003 14:00



    @dlabafr wrote:

    Well, DELL!

    What's your answer??

    Is it possible to authenticate using LEAP when using TrueMobile?

    Or do we have to buy Cisco Aeronet 350-pccards??

    /Anders




    Dell has no documentation on Cisco products.  You should follow  the instructions that Cisco provides to  connect to their device. 
  • qstick777

    7 Posts

    322

    0

    Posted June 9th, 2003 15:00

    Not that this will help, but here goes:

    Cisco does not make the Dell TrueMobile cards - I believe they are Orinoco.  Dell used to use Cisco cards, but due to Dell entering the network Switch market (making them and Cisco competitors), they no longer purchase OEM from Cisco (I've heard this from both our Cisco rep and our Dell rep). 

    I have been unsuccessful at getting a straight answer from Dell as to when they will have products that support LEAP.  I am currently testing a Latitude D800 with Centrino and Intel 2100 wireless card.  Documentation says that the card supports LEAP, but I have yet to find out where the support for this is.  Calls to Dell Tech Support have resulted with mysterious disconnects.  Documentation on Intel's site say that LEAP support is dependent on manufacturer supporting LEAP.

    If anybody is able to find any information on getting LEAP to work with either Dell TrueMobile or Intel Pro Wireless 2100, please let me know. 

  • 322

    0

    Posted June 9th, 2003 15:00

    This question does not have to do with the Cisco product, it has to do with Dell connecting using the LEAP p rotocol.  Dell should know if and how their product can communicate using the LEAP p rotocol. 
  • splantier

    1 Message

    322

    0

    Posted June 10th, 2003 15:00

    I have talked to Cisco and there is protocol that is CCX that is needed in order for the card to do LEAP. I am in the same boat since we are a dell shop and run Cisco wireless. I need to be able to use LEAP on the Truemobile cards also.
  • mjl0624

    38 Posts

    322

    0

    Posted June 10th, 2003 17:00

    There is a chance that Dell might put out new firmware and drivers for all their cards (Intel, Truemobile, etc) that will support WPA the newer wireless security standard ... that should help until the new 802.11x draft becomes standard ... then there will be standard security protocols that all the wireless manufacturers will hopefully be following.

    The new Cisco 1200 Series IOS firmware (12.20 rev 11) supports WPA ... but I still have yet to find a drivers/firmware for any of the cards I use to make them work with WPA even the Cisco Aironet 350 drivers/firmware. 

    *shrug* ... I'm definately not holding my breath on support for WPA, 802.11x, etc coming anytime soon tho ...

    ~Matt

  • xtremz0

    1 Message

    322

    0

    Posted July 29th, 2003 03:00

    Hi,

    I've been testing several wireless devices (Dell, IBM, Fujitsu, Compaq, etc) using Cisco LEAP.  You can try to visit this website :

    http://www.funk.com/radius/wlan/wlan_radius.asp

    try to read and download the demo software. So far I don't have problems in using this utility. Let me know if this works for you.

    Cheers :)

     

     

     

  • 185

    0

    Posted January 14th, 2004 13:00



    @ktm99 wrote:

    FYI,

     

     I have been using the 1300 wireless card on a c600 and downloaded the drivers for a d600. they work perfectly fine and this will give you leap authentication.



    If I use a Cisco wireless card I can authenticate with LEAP too.  The problem is using the built in Truemoblie 1150. Not adding an external card.  As far as I been able to find out, the 1150 is the only internal card compatible with my dell.