Trouble with Dsl and external linksys wirless card.
Ok well heres the problem, hopfully somone can help. i just receved my xps 400 today and after clearing all the junk and getting it to how i wanted i "attempted" to get internet. With my local cable provider which is a town provider and i get dsl from them. I know that i cant have it optain settings auto. I have the ip adress and all of that to punch in. But heres my problem. I dont know which i need to put that number into. I tryed putting it into the linksys but it just connects to my router where the internet goes into but its not picking up the net. Theres very little packets sent and even less receved. I tryed messing with that other network under local area conection but i couldnt seem to do that either i punched the i.p adress into both and nothing seems to work. Theres internet going into the router. the router is sending. so its somwhere in my pc with this external usb wirless internet card. Any help would be greatly appreciated. I cant seem to figure out what the problem is. All i know is that i need to punch in my i.p and Not detect settings.
You are not very clear about it, but you seem to be saying that you have the dsl modem connected to a router. You also say that you need to put in an IP address. This would only be true of the modem, since it is the only device directly connecting to the internet. Since your wireless card is connecting to the router, it needs to obtain a local IP address from the router and therefore needs to be set to obtain an IP address automatically.
my dsl comes from a box downstairs in the cellar where my internet comes in and my digital tv all of that. there is a hole drilled in my floor and the line comes right up into the back of my laptop. im under local area connection. and with that i have to put the ip adress in and all of that. It can not be on obtain automtaically. Now to get internet upstairs in my room i take that same cord that goes into this lapto, unplug it and plug it into the back of the linkssys router. Upstairs i have an external linksys modem to pick up the internet being sent from my router. I cant seem to get internet upstairs in my room even though im positive the cable is plugged in corectlu and it is being sent. Its being sent because my computer is picking up that my router is on. Its just it wont connect to the internet. So maby i do need obtain automatically for it to work. any other ideas?
From reading many discussion threads on Dell Talk, it is my understanding that one cannot simply unplug and plug in a line like that. When you change it from a notebook to a router, you need to power everything (the DSL and the router) OFF and make the connection after which you would power each on in sequence.
You may also need to notify your provider but I hope not.
The TCP/IP address is going to be recognized by the ISP and once the router is connected, I believe it will be providing addresses "further downstream" automatically for devices set to "use DHCP to assign address automatically"
volcano11
2 Intern
•
27973 Posts
334
0
Posted June 29th, 2006 04:00