UNSOLVED

fivebyfive

updated

21 years ago

0

7783

April 27th, 2006 16:00

Latitude XPi PCMCIA Modem Problem

I have a Dell Latitude XPI CD running Windows 98.  I am trying to use a Xircom Cardbus Ethernet 100 + Modem 56 (RBEM56G-100) in the PCMCIA slot.  The 10/100 side of the card works fine.  However, when I try to use the modem side, the computer doesn't detect the modem. 
 
I have tried the card in my HP notebook, and it recognizes the modem and I can dial out.  So the card definately works.
 
If I go to Control Panel and launch the PCMCIA icon, it does see the card.  However, when I launch the Modems icon, it doesn't detect the modem.  I've tried inserting the card before booting up, and after.  Doesn't make any difference.
 
 
  • 621

    0

    Posted April 27th, 2006 22:00

    Look in device manager and see what is says under "network devices"
  • 621

    0

    Posted April 28th, 2006 12:00

    In Device Manager, under Network Adapters:

      Dial-Up Adapter

      Infrared PnP Serial Port (*PNP0510)

       Xircom CardBus Ethernet 100 + Modem 56 (Ethernet Interface)

  • pixiekiller

    50 Posts

    621

    0

    Posted April 28th, 2006 13:00

    fiebyfive, can you compare the driver the HP is using with what the Latitude has?
  • 621

    0

    Posted May 6th, 2006 23:00

    I checked the driver, but both laptops are different Op Systems, so I'm not sure that will help.  The HP is running Windows 2000 Pro and the driver is version 2.58.2.2  -  this works ok.  The Dell is running XP and the driver is the latest and greatest from Dell (version 4.10.2222) - this does not work for the modem side of the card.

    I'm thinking there might be a problem with the PCMCIA slot.  How can I know for sure without replacing it?

  • pixiekiller

    50 Posts

    621

    0

    Posted May 9th, 2006 22:00

    Your original post says that the Latitude was running Win98, but you said your using an XP driver. I'm guessing that one of these is a typo. I don't think windows would allow you to load a driver that the OS does not support.

    Anyhow, since the system does recognize the card, I doubt that it is a bad slot. Do you have, or can you borrow another card to make sure. Also does the ethernet side work on the Dell.

    Is there an internal / additional modem on the Dell, if so, that one may be the default, and you just need to go into the modem / connection config screen and change it to use the PCMCIA.

    Once windows is booted up, and sees the card, you may want to try removing the card through device manager. Then reboot and let windows install it again. If windows miss identified it the very first time you plugged it in, it will just kept re-loading the same bad information every time it sees the card.