I recently purchased an e1405 with the a Intel Prowireless 3945 abg card. Shortly after, I started to experience problems with the wireless dropping out and disabling itself. I downloaded the newest drivers, and the problem still exists. I also went into the card properties and unchecked the box that let Windows disable the card to save power thinking that might be the problem. I also disabled the wireless hotkey in the BIOS. Can anyone help me out here?
Basicly, this is what happends. I am on the internet and everything is fine. Without warning, the radio will turn itself off and the wireless connection will be disabled. I can not get into network connection to re-enable it. There is no error message. As far as the AP, honestly, I do not know. I am using a university netowrk. And yes, the wireless really does disbale itself. I have also ran virus and spyware scanners with nothing out of the ordinary. In the device manager everything is OK. No yellow question marks, and no red x's.
can you give a little more info on what is happening? can you still see the network connection icon? does it really flip to 'disabled' status. what happens if you try to renable it? is there an error code? does it look normal in device manager?
lastly, what type of wireless router/AP are you connecting to?
Well, I started with Windows and then moved to ProSet. In all honesty, it seems to happen less when using ProSet. With windows, I was restarting the computer about 3 or 4 times every hour. With ProSet, about once or twice every 4 hours (restarting is the only way to get the wireless on again - network connections seems to lock up when the issue happens).
i guess what I meant was, does the status change from enabled to disabled or does it merely stop working? If the status does change, then what happens when you right-click the adapter and click 'enable.'
lastly, why can't you get into network connections? if there is no error then I assume something is happening?
The radio turns itself off. The "wifi" light turns off. When I go into "My network connections", if it lets me in, it will say that it is connected. If I try to right click it, nothing will happen and "my netowrk connections" will lock up. If it does not let me into "my netowrk connections", my network places just locks up as well. Now, after a restart, ProSet will give me a nice prompt that says your netowrk adapter has been disabled.
at this point i'm stabbing in the dark. could be driver/software related or it could be a hardware problem. does it only do this during activity or is it random? if you boot to safe mode with networking support will it happen there? does it happen if you don't associate to an AP?
NemesisDB
2 Intern
•
7944 Posts
433
0
Posted November 15th, 2006 17:00